Citrix ADC MPX
Statement 6
:
Caution: To reduce the risk of electric shock or energy hazards:
• This equipment must be installed by trained service personnel in a restricted-access location, as
defined by the NEC and IEC/UL/CSA 60950-1, The Standard for Safety of Information Technology
Equipment.
• Connect the equipment to a properly grounded safety extra low voltage (SELV) source. A SELV
source is a secondary circuit that is designed so that normal and single fault conditions do not
cause the voltages to exceed a safe level (60 V direct current).
• Incorporate a readily available approved and rated disconnect device in the field wiring.
• See the specifications in the product documentation for the required circuit-breaker rating for
branch circuit overcurrent protection.
• Use copper wire conductors only. See the specifications in the product documentation for the
required wire size.
• See the specifications in the product documentation for the required torque values for the
wiring-terminal nuts.
Statement 7
:
Caution: During installation or maintenance procedures, wear a grounding wrist strap to avoid ESD
damage to the electronics of the appliance. Use a conductive wrist strap attached to a good earth
ground or to the appliance. You can attach it to the connector beside the ESD symbol on the back.
Statement 8
:
Warning: Hazardous moving parts. Keep away from moving fan blades.
Fiber optic safety information
Danger: Hazardous Radiation
Fiber optic products use laser radiation with the potential to cause injury. Uncovered ports might
release this radiation. Avoid direct exposure to laser radiation. Do not stare into the beam, and do not
view directly with optical instruments. Do not remove any protective shields on fiber optic transceiver
modules.
© 1999-2019 Citrix Systems, Inc. All rights reserved.
108
