Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 390 -
ESC S
[Function]
Selecting STANDARD MODE
[Code]
<1B>H<53>H
[Outline]
[The specification which is common to the model]
• Switches from PAGE MODE to STANDARD MODE.
[Caution]
[The specification which is common to the model]
• This command is only effective if it is entered when in PAGE MODE.
• Any data mapped in PAGE MODE is erased.
• After this command is executed, the beginning of the line is taken as the next print start position.
• The print area defined by ESC W is initialized.
• The commands listed below, which have separate settings for STANDARD MODE and PAGE MODE, are
changed to the settings for STANDARD MODE use.
(1) Spacing setting:
ESC SP, FS S
(2) Line feed width setting:
ESC 2, ESC 3
• The following commands are valid only in setting in STANDARD MODE.
(1) ESC W
Sets the space amount for setting print area in PAGE MODE.
(2) ESC T
Selects the printing direction of character in PAGE MODE.
(3) GS $
Sets the absolute position of character vertical direction in PAGE MODE.
• STANDARD MODE is selected when the printer is turned on or reset, or when ESC @ is executed.
[See Also]
