Citizen CT-D150, Command Reference Manual

Page: 110 / 512

Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
CT-S281 CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
CT-D151/E651
- 109 -
2.2.6 Bit Image Commands
ESC * m n1 n2 [d] k
[Function] Specifying the bit image mode
[Code] <1B>H<2A>H<m>H<n1><n2> [<d>] k
[Range] m=0, 1, 32, 33
0
≤n1≤255, 0≤n2≤3
0
≤d≤255
k=n1+256×n2 (m=0, 1), k=(n1+256×n2)×3 (m=32, 33)
[Outline] [The specification which is common to the model]
• According to the number of dots specified in “n1”, “n2”, specify the bit image of mode “m”.
• The number of dots printed is divided by 256, whose quotient is taken as n2 and residual as “n1”. The total
number of dots printed in the horizontal direction is equal to n1+(256×n2).
• When bit image data have been input in excess of dot positions that can be printed on one line, the excess
data are discarded.
• ”d” is bit image data. Bits to be printed are specified as “1” and those not as “0”.
• The bit image modes specified by “m” are shown as follows:
m Mode
Vertical Direction Horizontal Direction
Dot Count Dot Density Dot Density
Maximum Dot
Count
0 8 dot single density 8 67dpi 101dpi (1)
1 8 dot double density 8 67dpi 203dpi (2)
32 24 dot single density 24 203dpi 101dpi (3)
33 24 dot double density 24 203dpi 203dpi (4)