Citizen CL-S700DT, User Manual

Page: 36 / 62

Printer Operation
36
2
Top Menu Sub Menu Default Menu Remarks
Menu Key Action Enters Menu Enters Menu
Repeat Last Set
Repeat Last One
Sets the menu key action.
Enters Menu:
Enters the menu setup mode.
Repeat Last Set:
Repeats the number of copies.
Repeat Last One:
Last one is issued only for the final page.
In the case of a count, afterwards, only
last one is issued.
Note:
Hold down the MENU key for at least
4 seconds in order to enter the Menu Setup
Mode when setting the "Repeat Last Set" or
"Repeat Last One" menus.
Interfaces
RS-232C Baud 9600 115200
57600
38400
19200
9600
4800
2400
Setting the baud rate of the serial interface.
· All settings related to the interface are
enabled after the power is reconnected.
RS-232C Parity None None
Odd
Even
Setting the communication parity for the
serial interface.
RS-232C Length 8 bits 8 bits
7 bits
Setting the character length for the serial
interface.
RS-232C Stop bit
[RS-232C Stopbit]
1 bit 1 bit
2 bits
Setting the stop bit for the serial interface.
RS-232C X-ON On Yes On Yes
Off No
Selectively setting the X-ON flow control of
the serial interface.
IEEE1284 On On
Off
Setting both direction of the Centro Interface.
Web Monitor Auto Auto
On
Off
Selecting the web monitor function.
Network Address 0.0.0.0 0.0.0.0 to
255.255.255.255
Setting fixed IP address of the LAN board.
Subnet Mask 0.0.0.0 0.0.0.0 to
255.255.255.255
Setting fixed subnet mask value of the LAN
board.
Gateway address 0.0.0.0 0.0.0.0 to
255.255.255.255
Setting fixed default gateway address of the
LAN board.
BOOTP Off On
Off
Setting the BOOTP of the LAN board.
DHCP Off On
Off
Setting the DHCP of the LAN board.
USB Device Class
[USB Device Clas]
Printer Printer
VCOM
Selects the USB device class.
USB VCOM Protocol
[VCOM Protocol]
Auto Auto
DTR
X-ON
Selects the protocol (flow control) when
operating USB VCOM.
Machine
Information
[Machine Info]
Model Number – CL-S*** Displays the model name.
Boot Version – *.* Displays the boot version.
ROM Version – ******** Displays the ROM version.
ROM Date – **/**/** Displays the date the ROM was prepared.
ROM CheckSum – **** Displays the check sum of the ROM.
Head Check – OK
NG
Displays the results of the head check.
Print Counter – ****.*** km Displays the print counter.
Mode Settings
[Datamax® Emulation]