Printer Operation
34
2
Top Menu
Sub Menu
Default
Menu
Remarks
Page Setup
Print Speed
7 IPS
2 to 7 IPS
Printing speed setting.
Print Darkness
12
00 to 30
Adjusting print darkness.
Darkness Adjust
[Darkness Adj]
00
-10 to 10
Fine adjustment of darkness commands.
Continuous Media
Length
[Cont Media Len]
4.00 inch
101.6 mm
0.25 to 32.00 inch
6.4 to 812.8 mm
Setting media length of continuous media.
Lower level = during mm mode.
Vertical Position
[Vertical Pos]
0.00 inch
0.0 mm
-1.00 to 1.00 inch
-25.4 to 25.4 mm
Adjusting printing start position.
Horizontal Shift
[Horizontal Shif]
0.00 inch
0.0 mm
-1.00 to 1.00 inch
-25.4 to 25.4 mm
Adjusting horizontal image position.
Vertical Image Shift
[Vertical Image]
0.00 inch
0.0 mm
0.00 to 32.00 inch
0.0 to 812.8 mm
Adjust the off set value in vertical when
mapping data on a RAM.
Media Sensor
See Through See Through
Reflect
None
Selecting media sensor.
Small Media
Adjustment
[Small Media Adj]
Off
On
Off
Setting for small media.
Small Media Length
[Small Media Len]
1.00 inch
25.4 mm
0.25 to 1.00 inch
6.4 to 25.4 mm
Setting media length for small media.
Symbol Set
PM
50 symbols
Setting symbol set.
System Setup
Sensor Monitor
–
–
Displays level of sensor that is currently
selected.
Sensor Level
1.4 V
0.0 V to 3.0 V
Selects threshold of the sensor.
Paper End Level
2.80 V
0.01 V to 3.00 V
Sets the paper end level.
Error Reporting
[Error Report]
On Printing
On Printing
Immediate
Setting for error report.
Cover Open Sensor
[Cover Sensor]
Off
On
Off
Sets the cover open sensor.
Buzzer Select
Exec/Err
Exec/Err
All
Error
Key
None
Setting buzzer sounding conditions.
Metric/Inch
[Metric/Inch Sel]
Inch
Inch
mm
Sets the units.
Menu Setting Table
Page Setup Menu
- allows you to change settings related to the media or print quality.
System Setup Menu
- allows you to change settings for the printer hardware and basic control systems.
After Print Menu
- changes how the printer reacts after the label has been printed.
Interfaces
- changes interface parameters such as baud rate.
Machine Information, Test Mode
- allows you to check and/or print test pages and information about the
printer.
Global Config menu
- allows you to switch between 3 complete 'config sets' contained within the printer.
Menu Setting
Press the MENU key in print possible status to enter MENU Setup Mode. Use the keys on the operation panel
according to the LCD display to setup the printer. The contents that can be setup on the printer are shown
below. And the items that are actually displayed on the LCD are shown in [ ].
Datamax® Emulation
Mode Settings
[Datamax® Emulation]
