Setup
14
1
Part Names and Functions
2
4
1
5
6
3
1
Thermal printhead
This is the printhead. Avoid touching this with your fingertips and
leaving grease or dirt on the printhead surface.
2
Damper arm
The media can be installed by raising this arm.
The media can be held in place by lowering this arm.
3
Fixed media sensor
Alternative method to detect the label or tag position. This sensor is
more accurate for small labels as it is closer to the print head.
4
Left media guide
This is a fixed part of the printer. The left side of the media (labels,
tags) as viewed from the front of the printer should be placed against
this media guide.
5
Right, movable media guide
Slide the right media guide so that it just touches the media. It should
"guide" the media through the printer. It should
not hold it firmly
otherwise the media will jam.
6
Platen
Interlocked with the thermal printhead, it feeds media backwards or
forwards.
