Printer Operation
25
(p.45)
Media Width Adjustment (p.46)
Setting the Media
Set the media roll and media holder in to the printer as shown
41
above1 It is advisable to pull a length of media forwards and
through the mechanism ready for later positioning1
Move the media roll so it is touching the left side of the
51
housing1 Then slide the black movable media guide so it is
touching the media on the right side1
Note:
Do not try to hold the media too tightly with these guides as it will
cause the printer to jam during printing.
Align the media with the left fixed media guide (2 locations),
61
align the right movable media guide with the media width, and
lower the damper arm which loosely holds the media in position1
Fixed media guide
Damper arm
Movable media
guide
Lower the head unit back down to the closed position1 Push the
71
head close knob firmly to close and lock the mechanism1 The
mechanism is only locked correctly when you head a "click"1
Align it with the width of the media that has been set, then set
the media width adjustment screw and the media thickness
adjustment knob1 See "Chapter 3 Printer Adjustments"1
Media width
adjustment knob
Media thickness
check window
Media thickness
adjustment screw
Media width check window
Head unit
With the power switched on, push the FEED key to feed the
81
media1 It will halt at the next print start position1
