17
TS9000/TS9050 TouchStar Systems User Manual
CONNECTING EXTERNAL/OPTIONAL EQUIPMENT
With the exception of the antenna connection for wireless
operation, all connections to the TouchStar system are made via
connectors on the rear panel.
Figure 8. Rear Panel Connectors
DC Power Connector
The DC power connector is a locking 3-pin connector that
a12VDC from either a wall-mounted power supply in
fixed-mount installations, or the DC power converter in mobile,
wireless installations. The power converter connector is a
locking type. Remove by pulling back the connector shell.
Do
not attempt to remove the power supply connector by un-
screwing the strain relief.
See Figure below.
Figure 9a. Power Connector release
3
2
1
Figure 9b. DC Power Connector
TABLE 2 - DC POWER CONNECTOR PINOUT
Pin
Signal
1
No Connection
2
GND (+12 V Return; NOT chassis ground)
3
+12 VDC
INSTALLATION & MAINTENANCE - 2
