21
TS9000/TS9050 TouchStar Systems User Manual
TABLE 7 - KEYBOARD 4-PIN LOCKING CONNECTOR PINOUT
Pin
Signal
1
+5V
2
Keyboard Data
3
Keyboard Clock
4
Ground
Mouse Port
The mouse connector is a IBM PS/2 standard, 5-pin mini-DIN
connector.
Figure 13. Mouse DIN Connector
TABLE 8 - MOUSE 5-PIN DIN CONNECTOR PINOUT
Pin
Signal
1
Mouse Data
2
No Connection
3
Ground
4
+5 V
5
Mouse Clock
PCMCIA
The TouchStar is supplied with dual PCMCIA slots which
provide an interface for portable memory cards, miniature disk
drives, modems, fax/modem cards, and network connections.
The TouchStar system software is provided with the appropriate
PCMCIA drivers which work with all operating systems sup-
ported by the TouchStar. The TouchStar’s two PCMCIA slots
each contain a standard 68-pin PCMCIA connector, and can
accept both Type II (add-on devices such as Flash Cards,
modems and network adapters) and Type III (miniature disk
drive interface) cards. Memory and storage cards will typically
appear on the system as drive E:\ or F:\.
INSTALLATION & MAINTENANCE - 2
