Cisco WRT350N User Manual Download | Manualshive

Page: 22 / 93

background image

15

Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link
The Setup Tab - Basic Setup

Wireless-N Gigabit Router with Storage Link

Host Name and Domain Name

. Some ISPs require these names as identification. You may have to check with

your ISP to see if your broadband Internet service has been configured with a host and domain name. In most
cases, leaving these fields blank will work.

MTU

. The MTU (Maximum Transmission Unit) setting specifies the largest packet size permitted for network

transmission. To manually set a value, select

Manual

and enter the value desired in the

Size

field. You should

leave this value in the 1200 to 1500 range. Most DSL users should use the value 1492. The default is

Auto

, which

allows the Router to select the best MTU for your Internet connection.

Network Setup

The Network Setup section allows you to change the Router’s local network settings.

Router IP

The Router’s Local IP Address and Subnet Mask are shown here. In most cases, you should keep the defaults.

Local IP Address

. The default value is

192.168.1.1

.

Subnet Mask

. The default value is

255.255.255.0

.

DHCP Server Setting

The Router can be used as a Dynamic Host Configuration Protocol (DHCP) server for your network. A DHCP server
automatically assigns an IP address to each computer on your network. Unless you already have one, it is highly
recommended that you leave the Router enabled as a DHCP server.

DHCP Server

. DHCP is enabled by factory default. If you already have a DHCP server on your network, set the

Router’s DHCP option to

Disabled

. If you disable DHCP, remember to assign a static IP address to the Router.

Start IP Address

. Enter a value for the DHCP server to start with when issuing IP addresses. Because the default

IP address for the Router is 192.168.1.1, the Start IP Address must be 192.168.1. 2 or greater, but smaller than
192.168.1.254. The default Start IP Address is

192.168.1.100

.

Maximum Number of Users

(Optional). Enter the maximum number of PCs that you want the DHCP server to

assign IP addresses to. This number cannot be greater than 253. The default is

50

.

Client Lease Time

. The Client Lease Time is the amount of time a network user will be allowed connection to the

Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be “leased”
this dynamic IP address. After the dynamic IP address has expired, the user will be automatically assigned a new
dynamic IP address. The default is

0

minutes, which means one day.

dynamic ip address

: a temporary IP

address assigned by a DHCP server.

«
...
20
21
22
23
24
...
»

Summary of Contents for WRT350N






























































































Reviews:

No comments

Related manuals for WRT350N

Brand: Paradyne Pages: 16

Brand: Abocom Pages: 1

Brand: Qlogic Pages: 2

Brand: Qlogic Pages: 172

Brand: Hawking Pages: 2

Brand: Axis Pages: 104

Brand: Ruckus Wireless Pages: 2

Brand: Rosewill Pages: 10

Brand: insys icom Pages: 4

Brand: WABCO Pages: 29

Brand: BEC Pages: 159

FlexNetwork 5130 Series

Brand: HPE Pages: 33

OmniStor 4900F Series

Brand: Rackable Systems Pages: 196

Brand: Valcom Pages: 3

OfficeConnect 3CXSH654B

Brand: 3Com Pages: 52

DGN2200M - Wireless-N 300 Router

Brand: NETGEAR Pages: 95

Brand: Paradyne Pages: 46

Brand: B&B Electronics Pages: 90

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands