Cisco WRT350N User Manual Download

Page: 40 / 93

Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link
The Storage Tab - Administration

Wireless-N Gigabit Router with Storage Link

The Storage Tab - Administration

The

Administration

screen allows you to manage the users and groups of users that can access the shares.

Basic

Machine Name

. Enter a name for the Router. Punctuation and other special characters (e.g., * / | \) cannot be

used in the name.

Workgroup Name

. Enter the Workgroup Name of your networked computers.

After you have made your changes, click the

Save Settings

button to apply your changes, or click the

Cancel

Changes

button to cancel your changes.

User Management

The users are listed in the User Management table. There are two default users, admin (read/write access) and
guest (read-only access); these cannot be deleted.

Properties - Modify

. Click the

Modify

button to change the properties of a user. On the

User Properties

screen,

enter a different name for the user, change the password, and/or select a different group from the

Group

drop-

down menu. Click the

Create User

button to save the new properties, or click the

Clear

button to clear the

changes. Click the

Cancel

button to cancel the changes.

Delete

. Click the

Delete

button to remove a user.

Create New User

. Click the

Create New User

button to create a new user. On the

User Properties

screen, enter a

name for the user. Then enter a password and enter it again in the

Re-enter to confirm

field. Select a group from

the

Group

drop-down menu. Click the

Create User

button to save the new properties, or click the

Clear

button to

clear the changes. Click the

Cancel

button to cancel the changes.

Group Management

The groups are listed in the Group Management table. There are two default groups, admin and guest; these
cannot be deleted.

Properties - Modify

. Click the

Modify

button to change the user membership of a group. On the

Group

Properties

screen, users who are not members are listed in the Other Users column, and users who are members

are listed in the Users in Group column. To add a user to the group, select the user, and click the

>> Join Group

button. To remove a user from the group, select the user, and click the

<< Remove

button. Click the

Save

Figure 5-31: Storage Tab - Administration

Figure 5-32: User Properties

Summary of Contents for WRT350N






























































































Search results

Summary of Contents for WRT350N

Reviews:

Related manuals for WRT350N

Brands by name

Popular brands

Cisco WRT350N, User Manual

Search results

Summary of Contents for WRT350N

Reviews:

Related manuals for WRT350N

Brands by name

Popular brands