Cisco WRT350N User Manual Download

Page: 18 / 93

Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link
How to Access the Web-based Utility

Wireless-N Gigabit Router with Storage Link

•

DMZ. Click this tab to allow one local user to be exposed to the Internet for use of special-purpose services.

•

QoS. Quality of Service (QoS) ensures better service to high-priority types of network traffic.

Administration

•

Management. On this screen, alter the Router’s password, access privileges, and UPnP settings. You can also
use this screen to back up and restore the Router’s configuration file.

•

Log. If you want to view or save activity logs, click this tab.

•

Diagnostics. If you want to run a ping or traceroute test, then use this screen.

•

Factory Defaults. If you want to restore the Router’s factory defaults, then use this screen.

•

Firmware Upgrade. Click this tab if you want to upgrade the Router’s firmware.

Status

•

Router. This screen provides status information about the Router.

•

Local Network. This provides status information about the local network.

•

Wireless Network. This provides status information about the wireless network.

How to Access the Web-based Utility

To access the Web-based Utility of the Router, launch Internet Explorer or Netscape Navigator, and enter the
Router’s default IP address,

192.168.1.1

, in the

Address

field. Press the

Enter

key.

A screen will appear asking you for your User name and Password. Leave the

User Name

field blank. Enter

admin

in the

Password

field. Then click the

button.

Make the necessary changes through the Utility. When you have finished making changes to a screen, click the

Save Settings

button to save the changes, or click the

Cancel Changes

button to undo your changes. For

information on a tab, click

Help

The Setup Tab - Basic Setup

The

Basic Setup

screen is the first screen you see when you access the Web-based Utility.

Figure 5-1: Router Login

Figure 5-2: Setup Tab - Basic Setup

(Automatic Configuration - DHCP)

NOTE:

Some of these connection types may not

be available in your area.

Summary of Contents for WRT350N






























































































Search results

Summary of Contents for WRT350N

Reviews:

Related manuals for WRT350N

Brands by name

Popular brands

Cisco WRT350N, User Manual

Search results

Summary of Contents for WRT350N

Reviews:

Related manuals for WRT350N

Brands by name

Popular brands