Cisco WRT350N User Manual Download | Manualshive

Page: 20 / 93

background image

13

Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link
The Setup Tab - Basic Setup

Wireless-N Gigabit Router with Storage Link

Service Name

. If provided by your ISP, enter the Service Name.

Connect on Demand and Max Idle Time

. You can configure the Router to cut the Internet connection after it

has been inactive for a specific period of time (Max Idle Time). If your Internet connection has been
terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your
connection as soon as you attempt to access the Internet again. To use Connect on Demand, click the radio
button. If you want your Internet connection to remain on at all times, enter

0

in the

Max Idle Time

field.

Otherwise, enter the number of minutes you want to have elapsed before your Internet access disconnects.

Keep Alive and Redial Period

. This option keeps your Internet access connected indefinitely, even when it

sits idle. If you select this option, the Router will periodically check your Internet connection. If the connection
is down, then the Router will automatically re-establish the connection. To use this option, click the radio
button next to

Keep Alive

. The default Redial Period is

30

seconds.

Click the

Save Settings

button. Then click the

Status

tab, and click the

Connect

button.

PPTP

Point-to-Point Tunneling Protocol (PPTP) is a service that applies to connections in Europe and Israel only.

Server IP Address

. This is the IP address that the Router has, when seen from the Internet. Your ISP will

provide you with the IP address you need to specify here.

Subnet Mask

. This is the Router’s Subnet Mask, as seen by external users on the Internet (including your

ISP). Your ISP will provide you with the Subnet Mask.

Default Gateway

. Your ISP will provide you with the Default Gateway Address.

User Name and Password

. Enter the User Name and Password provided by your ISP.

Connect on Demand and Max Idle Time

. You can configure the Router to cut the Internet connection after it

has been inactive for a specific period of time (Max Idle Time). If your Internet connection has been
terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your
connection as soon as you attempt to access the Internet again. To use Connect on Demand, click the radio
button. If you want your Internet connection to remain on at all times, enter

0

in the

Max Idle Time

field.

Otherwise, enter the number of minutes you want to have elapsed before your Internet access disconnects.

Keep Alive and Redial Period

. This option keeps your Internet access connected indefinitely, even when it

sits idle. If you select this option, the Router will periodically check your Internet connection. If the connection
is down, then the Router will automatically re-establish the connection. To use this option, click the radio
button next to

Keep Alive

. The default Redial Period is

30

seconds.

Figure 5-5: PPTP

«
...
18
19
20
21
22
...
»

Summary of Contents for WRT350N






























































































Reviews:

No comments

Related manuals for WRT350N

xStack Storage DSN-4000 Series

Brand: D-Link Pages: 5

Transportation FiberinMotion

Brand: Radwin Pages: 122

NJ220 - IntelliJack Switch

Brand: 3Com Pages: 82

Conel UR5i v2 Libratum

Brand: B&B Electronics Pages: 32

IPAM-1600s Series

Brand: C-Com Pages: 148

LBON320AC Series

Brand: Lindsay Broadband Pages: 4

SmartSTACK ELS100-24TXM

Brand: Cabletron Systems Pages: 117

RuggedSwitch RS500

Brand: RuggedCom Pages: 16

Brand: Camozzi Pages: 22

Brand: Avaya Pages: 16

NetVanta 300 Series

Brand: ADTRAN Pages: 2

CONNECT Box Pro

Brand: ratiotec Pages: 12

3CRWE737A - 11Mbps Airconnect Wireless Lan PC Card...

Brand: 3Com Pages: 6

Brand: ELC Pages: 12

Brand: D-Link Pages: 30

Brand: D-Link Pages: 23

Brand: D-Link Pages: 120

Brand: D-Link Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands