Cisco VG30D, User Manual

Page: 66 / 118

9-4
Cisco VG30D Voice Gateway User Guide
OL-19276-01
Chapter 9 DPNSS Compliance Tables
Data Call
Data Call
Compliance table for a PBX that supports the circuit switched data call
25 Night service Partial support. Supported
when PBX provides diversion
number. No provision for
configuring a pre-set Night
Service Answer Point number.
26 Centralised operator Partial support. The following
BTNR 188 features get
supported: 11, 12, 13, 14 & 22.
29 Add on conference Standard conferencing
functionality - supported
between the Legacy and IP
environments.
31 Call back when next used Partial support. Can only be
support where a single link exists
between Cisco Unified
Communications Manager and
DPNSS end point
36 Call back messaging Some PBXs (for example, Mitel
PBXs) use this service for
setting/clearing Message
Waiting Indicators. The Cisco
VG30D Voice Gateway supports
this usage.
37 Loop avoidance Configurable, default set to 10
48 Number Presentation Restriction A-party number restriction only
49 Non-Specified Information
Message Fully supported in Transit Mode
Note
NSIMs get filtered out
when calls are transited
through Cisco Unified
Communications
Manager.
DPNSS 188 Section Feature Description
Comments (specific to CUCM
interworking)
Service Variant Comply Comment
Originate Circuit Switched-Data
Calls? Yes