Cisco VG30D, User Manual

Page: 39 / 118

4-11
Cisco VG30D Voice Gateway User Guide
OL-19276-01
Chapter 4 Management and Configuration
Interworking
•
Default Outgoing Calling Number Type : This option gets used to force a particular number type
and plan in Called and Calling Party Number Information Elements. Options include: No Default ,
Unknown , L2 Regional , L1 Regional , Private , Local , International , National , Network
Specific , Subscriber or Abbreviated .
• Default Outgoing Called Number Plan : This option gets used to force a particular number type
and plan in Called and Calling Party Number Information Elements. Options include: No Default ,
Unknown , ISDN/E.164 , Data/X.121 , Telex/F.69 , National or Private .
•
Default Outgoing Called Number Type : This option gets used to force a particular number type
and plan in Called and Calling Party Number Information Elements. Options include: No Default ,
Unknown , L2 Regional , L1 Regional , Private , Local , International , National , Network
Specific , Subscriber or Abbreviated .
•
Insert Default Destination Address : This box needs to be checked if a Default Destination
Address is used.
• Default Destination Address : This option gets used to provide a Called Party Number when no
dialed digits are received from the DPNSS PBX or network.
•
Reject Diversion Requests for Numbers longer than : The Cisco VG30D Voice Gateway will
reject diversion requests if the Destination Address is longer than the specified number of digits.
Interworking
Interworking configuration options include the following:
•
Call Completion enabled : If box is checked, this enables the interworking of QSIG Call
Completion services into DPNSS Call Back when Free and Call back when Next Used.
• Message Waiting option : Use this option to specify the way in which Message Waiting
Supplementary service is interworked. The Cisco VG30D Voice Gateway can support interworking
DPNSS into pure
Q.Sig , the Cisco Call Manager method (which requires the CCM Message
Waiting ON number and the CCM Message Waiting OFF number to be provided), attempt to
perform
Both methods, or None .
•
Facility Element coding : Facility elements that are generated by the interworking task may get
encoded by using the ETSI or ISO standard.
•
Message Waiting NSI option : The Non Standard Information (NSI) that is used by various PBXs
may be generated by the Cisco VG30D Voice Gateway. The strings that are used by ISDX and
MD110 PBXs are provided, or the user may specify any other string by selecting Raw . Refer to
DPNSS Message Waiting Implementations for further information.
When MD110 is selected, the user must also specify the Message Waiting ON call centre number
and the Message Waiting OFF call centre number.
When Raw is selected as the Message Waiting NSI option, the user must specify the entire SIS used
by the recipient DPNSS PBX in the Message Waiting ON NSI string and Message Waiting OFF NSI
string fields.
•
Message Waiting ON NSI string : This option will represent the default string for the Message
Waiting NSI option unless Raw has been selected, when the user must insert the string to a
maximum of 30 characters.
• Message Waiting ON call centre number : If MD110 or Both are selected in the Message Waiting
NSI option , the user may insert up to a 10 character call centre number.