Cisco VG30D, User Manual

Page: 28 / 118

3-6
Cisco VG30D Voice Gateway User Guide
OL-19276-01
Chapter 3 Initial Configuration
Resetting Applications to Defaults
Note If you do not log out, another user will not be allowed to log in until the Non-Use Timeout Period
has elapsed (Refer to
Set Time & Date .). If another user is unable to log in immediately, make
sure the browser window has been closed. If necessary, close down the browser application.
You need to configure the Cisco VG30D Voice Gateway Ports. Refer to Management and Configuration .
Resetting Applications to Defaults
Refer to Reset to Defaults for a list of configuration values that will be reset. IP Addresses and Time and
Date settings will not get changed:
Should you want to reset the Cisco VG30D Voice Gateway to its default settings, perform the following
procedure:
Step 1
Select Configuration , Gateway and then Reset to Defaults .
Step 2
Select Set to Defaults .
Step 3
Select Administration from the top level Menu
Step 4
Select Reboot the Gateway .
Step 5 When the unit has rebooted, close the current Browser window and open a new one.
Step 6
Log in again. Refer to the Login section.