Cisco VG30D, User Manual

Page: 30 / 118

4-2
Cisco VG30D Voice Gateway User Guide
OL-19276-01
Chapter 4 Management and Configuration
Gateway
Traps are grouped as follows:
• Major Alarm
•
Port Errors
• Reset Traps
•
System Events
•
Layer 1 Alarms
To enable a group, check the box as required. To enable all groups select Enable All . Select Submit to
save any changes.
Refer to SNMP Traps for the group tables. You will find links to the MIBs that define the Cisco VG30D
Voice Gateway traps on the Gateway Management Interface page.
Reset to Defaults
This allows the user to set the following groups of the Cisco VG30D Voice Gateway configuration
parameters to their default values.
•
DPNSS Basic, Advanced and Services
•
Q.931 Basic, Advanced and Services
•
SNMP Traps
•
Inter-working
• Access Control
No change will occur to the Cisco VG30D Voice Gateway’s date and time settings, IP address, software
selection, logs, or statistics. Reboot the Cisco VG30D Voice Gateway for changes to take effect.
Back Up Configuration
Caution
You cannot restore backups from a Westell IiQ3000 Voice Gateway to the Cisco VG30D Voice Gateway.
You cannot restore backups from a Cisco VG30D Voice Gateway to the Westell IiQ3000 Voice Gateway.
When the Cisco VG30D Voice Gateway has been satisfactorily configured, you can back up this
configuration to an FTP server for restoring at a later date in the event of a nonrecoverable system failure.
To back up the configuration, perform the following procedure:
Step 1
From the main menu, select Configuration , Cisco VG30D Voice Gateway and
Back Up Configuration .
Step 2
Enter the FTP Server IP Address onto which the configuration is to be backed up.
Step 3 Enter the User Name and Password to access the FTP Server.
Step 4
Insert the name of the Directory on the FTP Server.
Step 5 Give your back up configuration a file name.
Step 6
Give a brief description of the configuration. Consider this step as optional.