Cisco VG30D, User Manual

Page: 99 / 118

A-3
Cisco VG30D Voice Gateway User Guide
OL-19276-01
Appendix A Approvals, Safety Instructions, and Statutory Information
Lithium Cell
The specification of the earth connecting cable is:
• Current rating 17 Amps, with a cross sectional area of 1.5 mm
2
, Wire 7/0.53 mm
•
Terminated at the Cisco VG30D Voice Gateway with an M3 ring terminal 1-2.6 mm
2
conductor
Note
When the 75-ohm BNC connectors are in use, permanent earthing replaces the requirements of clause
6.1.2 of EN 60950 as both the TNV and the metal case have an earth connection.
Lithium Cell
This product includes an Integrated Circuit which contains a Lithium Cell. This device is identified by
the words Lithium Battery on its case and is fitted in position U4 on the processor card
(M48T37V-10MH 1 TR). The following warning should be strictly adhered to. Do not attempt to open
this device.
Caution
Risk of explosion if battery is replaced with incorrect type. Dispose of used batteries according to
instructions.Do not dispose of in fire
.
Flammability
Flammability meets the requirements of EN 60950-1:2001, IEC60950-1:2001, AS/NZS60950:2000,
andUL60950-1 1st edition.
CE Mark
To meet the essential requirements of the R&TTE Directive (1999/5/EC), the following declarations are
made for CE marking:
EMC Declaration of Conformity
The Cisco VG30D Voice Gateway meets the requirements of the European Electromagnetic
Compatibility (EMC) Directive 89/336/EEC.
The product complies with the requirements of the following:
•
EN55022:1994 inc Amendment 1:1995 and Amendment 2:1996 Information Technology
Equipment- Radio Disturbance Characteristics- Limits and methods of measurement
•
EN55024:1998 inc Amendment 1:1995 and Amendment 2:2003 Information Technology
Equipment- Immunity Characteristics- Limits and Methods of Measurement.
• EN55022:2006 Telco Lines
•
EN6100-3-3:2006
• EN6100-3-3:A2:2005