3-5
Cisco VG30D Voice Gateway User Guide
OL-19276-01
Chapter 3 Initial Configuration
Access Control
Change Passwords
Note
Be aware that passwords are case sensitive and must consist of not less than seven and not more than ten
alphanumeric characters.
Step 1
Select
Administration
and then
Access Control
.
Step 2
Select the
Access level
field and enter the new password.
Step 3
Select the next field and reenter the new password.
The operation stays the same for other access levels.
Step 4
Select
Submit
and the
Change Confirmation
screen will display.
Step 5
Select
Go Back
to return to
Access Control Settings
or select
Close
to exit
Access Control
.
Note
Once the password has been changed, you will not be able to change any parameters until you
logout and login again with the new Password.
Step 6
Logout and then log in again with the new password at either the
Advanced
or the
Configure
level.
Set Non-Use Timeout Period
The
Non-Use Timeout Period
specifies the time that is allowed for a user to be logged in to the Gateway
Management Interface without actively using it before being automatically logged out when another user
attempts to log in. You can set it for 3 to 15 minutes.
Step 1
Select
Administration
and then
Access Control
.
Step 2
Insert a number for the Non-Use Timeout Period.
Step 3
Select
Go Back
to return to
Access Control Settings
or select
Close
to exit
Access Control
.
Logging Out
Step 1
Select
Logout
from the main Menu.
Step 2
Confirm that you want to log out.
Step 3
Close the browser window.
Summary of Contents for VG30D
