Cisco SX80 Reference Manual Download Page 71

Page: 71 / 231

D15107.05

Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.

Cisco TelePresence SX80

API Reference Guide

Time configuration

xConfiguration Time TimeFormat

Set the time format.

Requires user role:

USER

Value space:

<24H/12H>

24H:

Set the time format to 24 hours.

12H:

Set the time format to 12 hours (AM/PM).

Example:

xConfiguration Time TimeFormat: 24H

xConfiguration Time DateFormat

Set the date format.

Requires user role:

USER

Value space:

<DD_MM_YY/MM_DD_YY/YY_MM_DD>

DD_MM_YY:

The date January 30th 2010 will be displayed: 30.01.10

MM_DD_YY:

The date January 30th 2010 will be displayed: 01.30.10

YY_MM_DD:

The date January 30th 2010 will be displayed: 10.01.30

Example:

xConfiguration Time DateFormat: DD _ MM _ YY

xConfiguration Time Zone

This has been replaced with the Time OlsonZone setting as of software version TC7.2.

xConfiguration Time OlsonZone

Set the time zone for the geographical location of the video system. The information in the value

space is from the tz database, also called the IANA Time Zone Database.

Requires user role:

USER

Value space:

<Africa/Abidjan, Africa/Accra, Africa/Addis_Ababa, Africa/Algiers, Africa/Asmara,

Africa/Asmera, Africa/Bamako, Africa/Bangui, Africa/Banjul, Africa/Bissau, Africa/Blantyre, Africa/

Brazzaville, Africa/Bujumbura, Africa/Cairo, Africa/Casablanca, Africa/Ceuta, Africa/Conakry, Africa/

Dakar, Africa/Dar_es_Salaam, Africa/Djibouti, Africa/Douala, Africa/El_Aaiun, Africa/Freetown,

Africa/Gaborone, Africa/Harare, Africa/Johannesburg, Africa/Juba, Africa/Kampala, Africa/Khartoum,

Africa/Kigali, Africa/Kinshasa, Africa/Lagos, Africa/Libreville, Africa/Lome, Africa/Luanda, Africa/

Lubumbashi, Africa/Lusaka, Africa/Malabo, Africa/Maputo, Africa/Maseru, Africa/Mbabane, Africa/

Mogadishu, Africa/Monrovia, Africa/Nairobi, Africa/Ndjamena, Africa/Niamey, Africa/Nouakchott,

Africa/Ouagadougou, Africa/Porto-Novo, Africa/Sao_Tome, Africa/Timbuktu, Africa/Tripoli, Africa/

Tunis, Africa/Windhoek, America/Adak, America/Anchorage, America/Anguilla, America/Antigua,

America/Araguaina, America/Argentina/Buenos_Aires, America/Argentina/Catamarca, America/

Argentina/ComodRivadavia, America/Argentina/Cordoba, America/Argentina/Jujuy, America/

Argentina/La_Rioja, America/Argentina/Mendoza, America/Argentina/Rio_Gallegos, America/

Argentina/Salta, America/Argentina/San_Juan, America/Argentina/San_Luis, America/Argentina/

Tucuman, America/Argentina/Ushuaia, America/Aruba, America/Asuncion, America/Atikokan,

America/Atka, America/Bahia, America/Bahia_Banderas, America/Barbados, America/Belem,

America/Belize, America/Blanc-Sablon, America/Boa_Vista, America/Bogota, America/Boise,

America/Buenos_Aires, America/Cambridge_Bay, America/Campo_Grande, America/Cancun,

America/Caracas, America/Catamarca, America/Cayenne, America/Cayman, America/Chicago,

America/Chihuahua, America/Coral_Harbour, America/Cordoba, America/Costa_Rica, America/

Creston, America/Cuiaba, America/Curacao, America/Danmarkshavn, America/Dawson, America/

Dawson_Creek, America/Denver, America/Detroit, America/Dominica, America/Edmonton,

America/Eirunepe, America/El_Salvador, America/Ensenada, America/Fort_Wayne, America/

Fortaleza, America/Glace_Bay, America/Godthab, America/Goose_Bay, America/Grand_Turk,

America/Grenada, America/Guadeloupe, America/Guatemala, America/Guayaquil, America/Guyana,

America/Halifax, America/Havana, America/Hermosillo, America/Indiana/Indianapolis, America/

Indiana/Knox, America/Indiana/Marengo, America/Indiana/Petersburg, America/Indiana/Tell_City,

America/Indiana/Vevay, America/Indiana/Vincennes, America/Indiana/Winamac, America/

Indianapolis, America/Inuvik, America/Iqaluit, America/Jamaica, America/Jujuy, America/Juneau,

America/Kentucky/Louisville, America/Kentucky/Monticello, America/Knox_IN, America/Kralendijk,

America/La_Paz, America/Lima, America/Los_Angeles, America/Louisville, America/Lower_Princes,

America/Maceio, America/Managua, America/Manaus, America/Marigot, America/Martinique,

America/Matamoros, America/Mazatlan, America/Mendoza, America/Menominee, America/Merida,

America/Metlakatla, America/Mexico_City, America/Miquelon, America/Moncton, America/

Monterrey, America/Montevideo, America/Montreal, America/Montserrat, America/Nassau,

America/New_York, America/Nipigon, America/Nome, America/Noronha, America/North_Dakota/

Beulah, America/North_Dakota/Center, America/North_Dakota/New_Salem, America/Ojinaga,

America/Panama, America/Pangnirtung, America/Paramaribo, America/Phoenix, America/

Port-au-Prince, America/Port_of_Spain, America/Porto_Acre, America/Porto_Velho, America/

Puerto_Rico, America/Rainy_River, America/Rankin_Inlet, America/Recife, America/Regina,

America/Resolute, America/Rio_Branco, America/Rosario, America/Santa_Isabel, America/

Santarem, America/Santiago, America/Santo_Domingo, America/Sao_Paulo, America/

Scoresbysund, America/Shiprock, America/Sitka, America/St_Barthelemy, America/St_Johns,

America/St_Kitts, America/St_Lucia, America/St_Thomas, America/St_Vincent, America/

Contents

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xConfiguration

Summary of Contents for SX80








































































































































































































































Search results

Summary of Contents for SX80

Reviews:

Related manuals for SX80

Brands by name

Popular brands

Cisco SX80, Reference Manual

Search results

Summary of Contents for SX80

Reviews:

Related manuals for SX80

Brands by name

Popular brands