D15107.05
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
96
Cisco TelePresence SX80
API Reference Guide
xCommand Audio Volume Decrease
Decrease the volume on the endpoint.
Requires user role:
USER
Parameters:
Steps: <1..10>
Example:
xCom mand Audio Volume Decrease Steps:3
xCommand Audio Volume Increase
Increase the volume on the endpoint.
Requires user role:
USER
Parameters:
Steps: <1..10>
Example:
xCom mand Audio Volume Increase Steps:3
xCommand Audio Volume Mute
Mute the volume on the endpoint.
Requires user role:
USER
Example:
xCom mand Audio Volume Mute
xCommand Audio Volume Set
Set the volume on the endpoint to a specified level.
Requires user role:
USER
Parameters:
Level(r): <1..100>
Example:
xCom mand Audio Volume Set Level:30
xCommand Audio Volume SetToDefault
Set the current volume level as the default for the endpoint.
Requires user role:
USER
Example:
xCom mand Audio Volume SetToDefault
xCommand Audio Volume UnMute
Unmute the volume on the endpoint.
Requires user role:
USER
Example:
xCom mand Audio Volume SetToDefault
xCommand Audio VUMeter Start
Start collecting VU meter information for the connector identified by the ConnectorId and
ConnectorType parameters. Together these parameters identify the connector.
ConnectorId: The connector identifier is printed on the codec connector panel.
ConnectorType: Identifies whether it is an HDMI input connector, an audio line input connector or a
microphone connector.
Requires user role:
USER
Parameters:
ConnectorType(r): <HDMI/Line/Microphone>
ConnectorId(r): <1..8>
Example:
xCom mand Audio VUMeter Start ConnectorType: Microphone ConnectorId: 1
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand
