D15107.05
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
34
Cisco TelePresence SX80
API Reference Guide
xConfiguration Audio Input Microphone [1..8] Type
The microphone connectors are intended for electret type microphones. The microphone connector
can be set to line or microphone mode.
Requires user role:
ADMIN
Value space:
<Microphone/Line>
Microphone:
Select Microphone when you have 48 V Phantom voltage and the pre-amplification
is On.
Line:
Select Line when you have a standard balanced line input. The phantom voltage and
pre-amplification is Off.
Example:
xConfiguration Audio Input Microphone 1 Type: Line
xConfiguration Audio Output HDMI [1..2] Level
Define the output level of the HDMI output connector, in steps of 1 dB.
Requires user role:
ADMIN
Value space:
<-24..0>
Range:
Select a value between -24 and 0, in steps of 1 dB.
Example:
xConfiguration Audio Output HDMI 1 Level: 0
xConfiguration Audio Output HDMI [1..2] Mode
Determine if the audio channel on the HDMI output connector shall be enabled.
Requires user role:
ADMIN
Value space:
<Off/On>
Off:
Disable the audio channel on the HDMI output.
On:
Enable the audio channel on the HDMI output.
Example:
xConfiguration Audio Output HDMI 1 Mode: On
xConfiguration Audio Output Line [1..6] Channel
Define whether the Audio Line output is a mono signal or part of a multichannel signal.
Requires user role:
ADMIN
Value space:
<Right/Left/Mono>
Right:
The Audio Line output signal is the right channel of a stereo signal.
Left:
The Audio Line output signal is the left channel of a stereo signal.
Mono:
The Audio Line output signal is a mono signal.
Example:
xConfiguration Audio Output Line 1 Channel: left
xConfiguration Audio Output Line [1..6] Equalizer ID
Select the audio output line equalizer ID.
Requires user role:
ADMIN
Value space:
<1..8>
Range:
Select EqualizerID 1 to 8.
Example:
xConfiguration Audio Output Line 1 Equalizer ID: 1
xConfiguration Audio Output Line [1..6] Equalizer Mode
Set the audio output line equalizer mode.
Requires user role:
ADMIN
Value space:
<Off/On>
Off:
No equalizer.
On:
Enable the equalizer for the audio output line.
Example:
xConfiguration Audio Output Line 1 Equalizer Mode: Off
xConfiguration Audio Output Line [1..6] Level
Define the audio level on the line output connector.
See the Audio Level table in the Physical Interface Guide for the codec for a complete overview of
the menu values represented in dB.
Requires user role:
ADMIN
Value space:
<-24..0>
Range:
Select a value between -24 and 0, in steps of 1 dB.
Example:
xConfiguration Audio Output Line 1 Level: -10
xConfiguration Audio Output Line [1..6] Mode
Set the audio output line mode.
Requires user role:
ADMIN
Value space:
<Off/On>
Off:
Disable the Audio Line output.
On:
Enable the Audio Line output.
Example:
xConfiguration Audio Output Line 1 Mode: On
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration
