manualshive.com logo in svg

Cisco Smart Storage NSS322, Administration Manual

The Cisco Smart Storage NSS322 is a high-performance network-attached storage device designed for streamlined data administration. Unlock the full potential of this product by downloading the comprehensive Administration Manual, providing you with in-depth instructions and insights. Access the manual for free at manualshive.com, empowering you to optimize your storage management experience.

Share
Download
background image

NAS Maintenance

Power Outage or Abnormal Shutdown

Cisco Small Business NSS 322, NSS 324, and NSS 326 Smart Storage Administration Guide

181

5

 

Power Outage or Abnormal Shutdown

In case of a power outage or improper shutdown of the NAS, it will resume to the 

state before it is shut down.

NOTE

Other power outage options are available from the 

External Device > 

UPS Settings

 window.

If your NAS does not function properly after restart, do the following:

STEP 1

If the system configuration is lost, configure the system again.

STEP  2

In the event of abnormal operation of the NAS, contact customer service for 

technical support.

System Software Abnormal Operation

If the system software does not operate properly, the NAS automatically restarts 

to resume normal operation. If you find that the system restarts continuously, it may 

fail to resume normal operation. In this case, contact technical support.

System Temperature Protection

The system shuts down automatically for hardware protection if any of the 

following criteria is met:

• The system temperature exceeds 70°C (158°F)
• The CPU temperature exceeds 85°C (185°F)
• The hard drive temperature exceeds 65°C (149°F)

Summary of Contents for Smart Storage NSS322









































































































































































































Reviews:

No comments

Related manuals for Smart Storage NSS322

D-Link Verizon DSL-2750B Setup Manual preview
Verizon DSL-2750B
Brand: D-Link Pages: 6
D-Link DIR-857 Quick Installation Manual preview
DIR-857
Brand: D-Link Pages: 10
D-Link DSL-2740U Quick Installation Manual preview
DSL-2740U
Brand: D-Link Pages: 38
Datasheen D902AC User Manual preview
D902AC
Brand: Datasheen Pages: 25
Husky AISLE SHIELD Installation Instructions Manual preview
AISLE SHIELD
Brand: Husky Pages: 8
SanDisk SSD Ultra ATA Specification & User Manual preview
SSD Ultra ATA
Brand: SanDisk Pages: 44
Sun Microsystems Netra t 1120 Service Manual preview
Netra t 1120
Brand: Sun Microsystems Pages: 148
Spectra Logic Spectra 2K Library User Manual preview
Spectra 2K Library
Brand: Spectra Logic Pages: 93
E-TOP PR126g User Manual preview
PR126g
Brand: E-TOP Pages: 24
Intellinet 561051 Quick Install Manual preview
561051
Brand: Intellinet Pages: 12
Qsan XEVO Manual preview
XEVO
Brand: Qsan Pages: 28
IBM 88632SU User Manual preview
88632SU
Brand: IBM Pages: 100
H3C AR 46-80 Installation Manual preview
AR 46-80
Brand: H3C Pages: 103
Edimax EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0 User Manual preview
EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0
Brand: Edimax Pages: 118
Intermec Norand 6920 Reference Manual preview
Norand 6920
Brand: Intermec Pages: 232
TP-Link TD-8840 User Manual preview
TD-8840
Brand: TP-Link Pages: 25
Allied Telesis FS750/16 Installation Manual preview
FS750/16
Brand: Allied Telesis Pages: 44
Motorola solutions avigilon NVR4 Series Installation Manual preview
avigilon NVR4 Series
Brand: Motorola solutions Pages: 18

Brands by name

Popular brands

Load more brands