manualshive.com logo in svg

Cisco Smart Storage NSS322, Administration Manual

The Cisco Smart Storage NSS322 is a high-performance network-attached storage device designed for streamlined data administration. Unlock the full potential of this product by downloading the comprehensive Administration Manual, providing you with in-depth instructions and insights. Access the manual for free at manualshive.com, empowering you to optimize your storage management experience.

Share
Download
background image

Managing the System

Disk Management

Cisco Small Business NSS 322, NSS 324, and NSS 326 Smart Storage Administration Guide

110

3

 

To expand the capacity of a disk volume:

!

CAUTION

Do not turn off power to the NAS during this process.

STEP 1

Choose 

Disk Management > RAID Management

 from the Navigation menu. The 

RAID Management

 window opens.

STEP  2

Click on the volume that you want to expand.

STEP  3

Click 

Expand Capacity

. The 

Expand capacity

 window opens.

STEP  4

On the drive that you want to expand capacity, click 

Change

.

Migrate

This action enables a drive configuration to be migrated to 

a different RAID configuration. Migrate is supported for the 

following drive configurations: Migrate single drive to RAID 

1, 5, or 6, Migrate RAID 1 to RAID 5 or 6, Migrate RAID 5 to 

RAID 6.

Configure spare 

drive

This action allows you to add or remove a RAID 5 spare 

drive.

Start BITMAP/Stop 

BITMAP

Bitmap improves the time for rebuilding after a crash, or 

removing/re-adding a device. It does not improve normal 

read/write performance, and might even cause a small 

degradation in performance. However, if an array has a 

bitmap a device can be removed and re-added and only 

blocks changes need to be made since the removal (as 

recorded in the bitmap) can be resynced. Bitmap support 

is only available for RAID 1, 5, and 6.

Recover

This action can recover a failed RAID disk volume from 

“Inactive” status to the normal state (RAID 1, 5, and 6 will 

be recovered to the degrade mode, RAID 0 and JBOD will 

be recovered to the normal state). Before recovering the 

failed disk volume, confirm that all hard disks of the disk 

volume are properly seated in the NAS drive bay. Once 

recovery is completed, back up your disk data 

immediately in case the disk volume fails again. Not all 

inactive RAID disk volumes can be recovered.

Action

Description

Summary of Contents for Smart Storage NSS322









































































































































































































Reviews:

No comments

Related manuals for Smart Storage NSS322

Makita RF1101 Parts Breakdown preview
RF1101
Brand: Makita Pages: 2
360 Systems MAXX-2400-HD Specification preview
MAXX-2400-HD
Brand: 360 Systems Pages: 8
3Com 3CR860-95 - OfficeConnect Secure Router Features And Benefits preview
3CR860-95 - OfficeConnect Secure Router
Brand: 3Com Pages: 2
Linksys WRT54G3G-AT Product Data preview
WRT54G3G-AT
Brand: Linksys Pages: 2
Icidu NI-707533 Manual Manual preview
NI-707533
Brand: Icidu Pages: 10
Tandberg Data StorageLoader DLT VS160 Quick Installation Manual preview
StorageLoader DLT VS160
Brand: Tandberg Data Pages: 13
Tandberg Data StorageLoader DLT VS160 Installation And Operation Manual preview
StorageLoader DLT VS160
Brand: Tandberg Data Pages: 46
Tandberg Data StorageLibrary LTO-3 SCSI Quick Start Manual preview
StorageLibrary LTO-3 SCSI
Brand: Tandberg Data Pages: 2
Tandberg Data SDLT220-320 INTEGRATION Product Manual preview
SDLT220-320 INTEGRATION
Brand: Tandberg Data Pages: 142
Tandberg Data RDX QuikStor Quick Start preview
RDX QuikStor
Brand: Tandberg Data Pages: 3
Tandberg Data Magnum 224 Instructions Manual preview
Magnum 224
Brand: Tandberg Data Pages: 12
MicroNet BroadLink SP3353 Installation Manual preview
BroadLink SP3353
Brand: MicroNet Pages: 66
PEAKnx PNX11-10010 Getting Started preview
PNX11-10010
Brand: PEAKnx Pages: 14
NetComm 3G25W-R Manual preview
3G25W-R
Brand: NetComm Pages: 69
IBM H5S Setup, Operator, And Service Manual preview
H5S
Brand: IBM Pages: 149
FDiSK SecurePRO User Manual preview
SecurePRO
Brand: FDiSK Pages: 25
Jatheon PnC 100 Installation & Administrators Manual preview
PnC 100
Brand: Jatheon Pages: 52
Toto Link ND300V2 Manual preview
ND300V2
Brand: Toto Link Pages: 57

Brands by name

Popular brands

Load more brands