Sample Configurations
Configuring E-Mail Alerts
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide
114
9
-
Requires SMTP Authentication
—Select if the SMTP server requires a
login to send mail.
-
Requires POP before SMTP
—Select if the SMTP server requires a
POP login to send mail.
•
Account Name
—Enter the account name to be used on the e-mail server.
•
Password
—Enter the password associated with the account name.
•
POP Server Name
—Enter the name of the POP3 mail server that is being
used to receive e-mail.
•
Test SMTP Server
—Click to test the configuration. You will get an error
message if the transaction does not complete, for example, test fails due to
a wrong username or password.
•
Requires SSL Encryption
—Check the check box to enable. This option
supports cryptographic protocols that provide security and data integrity
for communications over TCP/IP networks such as the Internet.
STEP 4
In Secondary SMTP Server, repeat the above steps if you are configuring a
secondary SMTP server.
NOTE
Only one SMTP server is used, even if both the primary and secondary SMTP
servers are enabled. The secondary SMTP server is used if the camera cannot
connect to the primary server.
STEP 5
In E-mail Setup, configure the following:
•
Send To
—Enter at least one e-mail address. The second and third
addresses are optional. The e-mail alert is sent to the e-mail address or
addresses specified here.
•
Show From as
—Enter the e-mail address to be shown in the From field
when the e-mail is received.
•
Subject
—Enter the desired text to be shown as the subject for the e-mail
when it is received.
STEP 6
Click
Save
.
