Configuring the PVC2300 and WVC2300 Cameras
Applications > RS-485
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide
99
8
Port Settings
•
Baud Rate
—Select the desired baud rate for the device you connected.
•
Data Bits
—Select the desired data bits for the device you connected.
•
Parity
—Select the desired parity type for the device you connected.
•
Stop Bits
—Select the desired stop bits for the device you connected.
•
Address
—Enter the valid logical address of the receiver/driver being
controlled.
Preset Position
•
Set Preset Position
—Click to display the Set Pan/Tilt window that allows
you to define the preset point position.
Pan/Tilt
•
Set Home
—Set the desired position and click
Set Home
to define the
home position.
•
Preset List
—Select the desired preset position and the screen will update
with the current data for the selected preset. If you don’t need the desired
preset position, click Remove.
•
Preset Name
—Enter a suitable name for the current desired position and
then click
Add
to add to the preset list.
•
Pan Speed
—Select the desired speed for camera panning.
Default value is
5
.
•
Tilt Speed
—Select the desired speed for camera tilting. Default value is
5
.
Patrol Sequence
This feature determines how the camera will move when it is set to rotate. You can
set a number of preset positions. The camera will go to the first position, then
move through the list of preset positions until it is finished. The camera will stop at
the last position in the list.
To create the preset sequence, select the desired Preset in the left column and
click Add >>. Repeat until the desired sequence is complete.
