Sample Configurations
Configuring E-Mail Alerts
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide
113
9
Configuring E-Mail Alerts
When using motion detection, you may want to be advised by e-mail when
movement is detected. Configure your e-mail settings first and then configure
scheduling an event. See
“Scheduling an Event” on page 115
and
“Configuring
Motion Detection Area and Sensitivity” on page 116
.
To configure e-mail alerts, follow these steps:
STEP 1
Click
Setup
in the toolbar.
STEP 2
Click
Applications > Mail
. The Applications > Mail window displays.
STEP 3
In Primary SMTP, configure the following:
•
Check the check box
Primary SMTP
to upload to the primary SMTP.
•
SMTP Mail Server
—Enter the address of the Simple Mail Transport
Protocol (SMTP) server to be used to send e-mail.
•
Port
—Enter the port number of the mail server. The default is
25
.
•
Authentication
—From the drop-down list, choose one of the following
options:
-
Not Required
—Authentication is not required to send mail.
