Cisco ONS 15310-MA SDH, Procedure Manual, Page: 443 / 632

17-37
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
78-19416-01
Chapter 17 DLPs H100 to H199
DLP-H132 Change to the Default Network View Background Map
Note If you modify the background image, the change is stored in your CTC user profile on the local
computer. The change does not affect other CTC users on different computers.
Step 1 From the View menu, choose Go to Network View .
Step 2
Click the Provisioning > Defaults tabs.
Step 3 Under Defaults Selector, choose CTC and then Network .
Step 4
Click the Default Value field and choose a default map from the drop-down list. The map choices are
Germany, Japan, Netherlands, South Korea, United Kingdom, and the United States (default).
Step 5 Click Apply . The new network map appears.
Step 6
Click OK .
Step 7 If the ONS 15310-MA SDH icons are not visible, right-click the network view and choose Zoom Out .
Repeat until all the node icons are visible. (You can also choose Fit Graph to Window .)
Step 8
If you need to reposition the node icons, drag and drop them one at a time to a new location on the map.
Step 9 If you want to change the magnification of the icons, right-click the network view and choose Zoom In .
Repeat until the ONS 15310-MA SDH icons appear at the magnification you want.
Step 10
Return to your originating procedure (NTP).
DLP-H133 Apply a Custom Network View Background Map
Note
You can replace the network view background image with any JPEG or GIF image that is accessible on
a local or network drive. If you apply a custom background image, the change is stored in your CTC user
profile on the local computer. The change does not affect other CTC users on different computers.
Purpose This task changes the background map to the default map of the CTC
network view.
Tools/Equipment None
Prerequisite procedures DLP-H29 Log into CTC, page 16-43
Required/As needed As needed
Onsite/Remote Onsite or remote
Security Level Superuser only
Purpose This task changes the background image or map on the CTC network view.
Tools/Equipment None
Prerequisite procedures DLP-H29 Log into CTC, page 16-43
Required/As needed As needed
Onsite/Remote Onsite or remote
Security Level Retrieve or higher