manualshive.com logo in svg

Cisco ONS 15310-MA SDH, Procedure Manual, Page: 333 / 632

Share
Download
Cisco ONS 15310-MA SDH Procedure Manual Download Page 333

 

16-43

Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2

78-19416-01

Chapter 16      DLPs H1 to H99

  •

Choose 

Manual proxy configuration

 to add exceptions to the proxy server. In the 

No Proxy

 

for

 

option under the Manual Proxy Configuration, enter the IP addresses of the ONS 15454 nodes that 
you access. Separate each address with a comma. Click 

OK

 to close each open dialog box.

Note

For ONS 15454 nodes that have TCC2P cards installed with the TCC2P secure mode option 
enabled, enter the backplane LAN port IP addresses. If the node is in secure mode and the 
configuration has been locked, you will not be able to change the IP address unless the lock 
is disabled by Cisco Technical Support. See the “Management Network Connectivity” 
chapter in the 

Cisco ONS 15454 Reference Manual

 for additional information about secure 

mode.

Step 5

Return to your originating procedure (NTP).

DLP-H29 Log into CTC

Note

The ONS 15310MA-SDH can be networked with ONS 15454 nodes running Software Release 9.0 or 
later. You can log into the ONS 15454 nodes to manage the ONS 15310-MA SDH nodes. However, you 
must complete the 

“DLP-H21 Run the CTC Installation Wizard for Windows” task on page 16-26

 or the 

“DLP-H22 Run the CTC Installation Wizard for UNIX” task on page 16-29

. These tasks install the 

Release 9.1 and Release 9.2 software JAR files on your computer. The tasks must be repeated anytime 
you delete the CTC cache.

Note

For information about CTC views and navigation, see 

Appendix A, “CTC Information and Shortcuts.”

Step 1

From the computer connected to the ONS 15310-MA SDH, start Mozilla Firefox (PC or UNIX) or 
Netscape (PC only) to access IPv6 and start Netscape or Internet Explorer to access IPv4.

  •

If you are using a PC, launch Netscape or Mozilla Firefox from the Windows Start menu or a 
shortcut icon.

  •

If you are using UNIX, launch Netscape or Mozilla Firefox from the command line by typing:

  –

To install Netscape colors for Netscape use, type:

Purpose

Use this task to log into CTC, the graphical user interface software used to 
manage the ONS 15310-MA SDH.

Tools/Equipment

None

Prerequisite Procedures

NTP-H13 Set Up Computer for CTC, page 2-1

One of the following procedures:

  •

NTP-H15 Set Up a CTC Computer for a Corporate LAN Connection 
to the Node, page 2-4

, or

  •

NTP-H16 Set Up a Remote Access Connection to the Node, page 2-5

Required/As Needed

Required

Onsite/Remote

Onsite or remote

Security Level

Retrieve or higher

Summary of Contents for ONS 15310-MA SDH

























































































































































































































































































































































































































































































































































































































































Reviews:

No comments