manualshive.com logo in svg

Cisco ONS 15310-MA SDH, Procedure Manual, Page: 232 / 632

Share
Download
Cisco ONS 15310-MA SDH Procedure Manual Download Page 232

 

10-2

Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2

78-19416-01

Chapter 10      Change Node Settings

Before You Begin

NTP-H78 Change Node Management Information

Step 1

Complete the 

“DLP-H29 Log into CTC” task on page 16-43

. If you are already logged in, continue with 

Step 2.

Step 2

Complete the 

“NTP-H102 Back Up the Database” procedure on page 14-2

.

Step 3

As needed, complete the 

“DLP-H123 Change the Node Name, Date, Time, and Contact Information” 

task on page 17-31

.

Step 4

As needed, complete the 

“DLP-H124 Change the Login Legal Disclaimer” task on page 17-32

.

Step 5

After confirming the changes, complete the 

“NTP-H102 Back Up the Database” procedure on page 14-2

.

Stop. You have completed this procedure.

NTP-H79 Change CTC Network Access

Note

Additional ONS 15310-MA SDH networking information and procedures, including IP addressing 
examples, static route scenarios, Open Shortest Path First (OSPF) protocol, routing information protocol 
options, and Open System Interconnection (OSI) information, are provided in the “Management 
Network Connectivity” chapter of the 

Cisco ONS 15310-MA SDH Reference Manual

.

Step 1

Complete the 

“DLP-H29 Log into CTC” task on page 16-43

. If you are already logged in, continue with 

Step 2.

Step 2

Complete the 

“NTP-H102 Back Up the Database” procedure on page 14-2

. 

Step 3

Perform any of the following tasks as needed:

  •

DLP-H125 Change IP Settings, page 17-33

Purpose

This procedure changes basic information about the node such as node 
name, date, time, contact information, and the login legal disclaimer.

Tools/Equipment

None

Prerequisite Procedures

NTP-H20 Set Up Name, Date, Time, and Contact Information, page 3-3

Required/As Needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher

Purpose

This procedure changes essential network information, including IP 
settings, static routes, and OSPF options.

Tools/Equipment

None

Prerequisite Procedures

NTP-H21 Set Up CTC Network Access, page 3-6

Required/As Needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher

Summary of Contents for ONS 15310-MA SDH

























































































































































































































































































































































































































































































































































































































































Reviews:

No comments