Cisco ONS 15310-MA SDH, Procedure Manual, Page: 541 / 632

18-41
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
78-19416-01
Chapter 18 DLPs H200 to H299
Table 18-8 describes the values on the Provisioning > Line Thresholds tab for the DS-3 ports.
Table 18-9 describes the values on the Provisioning > Elect Path Thresholds tab for the DS-3 ports.
SF BER Sets the signal fail bit error
rate.
•
1E-3
•
1E-4 (default)
•
1E-5
SD BER Sets the signal degrade bit
error rate.
•
1E-5
• 1E-6
•
1E-7 (default)
• 1E-8
•
1E-9
Line Type Defines the line framing type. • UNFRAMED
•
M13 (multiplexed E1 to DS-3 framing)
• C Bit (parity framing)
Line Coding Defines the DS-3
transmission coding type.
• B3ZS (Bipolar 3 Zero Substitution)
Line Length Defines the distance (in feet)
from backplane connection to
the next termination point.
•
0 - 225 (default)
• 226 - 450
automaticInServi
ce Soak Automatic in-service soak.
•
Duration of valid input signal in hh.mm after
which the port is set in service by the software.
• 0 to 48 hours, 15-minute increments.
Table 18-7 Line Options for DS-3 Ports (continued)
Parameter Description Options
Table 18-8 Line Thresholds Options for DS-3 Ports
Parameter Description
Port Port number (display only).
•
1 to 3
CV Coding violations. Available for Near End and Far End.
ES Errored seconds. Available for Near End and Far End.
SES Severely errored seconds. Available for Near End and Far End.
LOSS Number of one-second intervals containing one or more loss of signal (LOS) defects.
Available for Near End and Far End.