Cisco IP Conference Phone 8832 User Manual Download Page 66

Page: 66 / 76

Step 2

Select

Device administration

Profile account setup

Your username and password are automatically filled. These fields are blank if your username and password
were not added before.

Step 3

Press

Sign in

to save your username and password.

If any of the

Username

field or the

Password

field is empty, the phone displays a grey

Sign in

softkey and you can't press the softkey.

Note

Step 4

(Optional) Enter a new username and password if you want to login with another set of credentials.

Add Multiple Locations for a BroadWorks XSI User

You can add multiple locations to your phone extension. This allows an incoming call to seamlessly be moved
from your phone to other mobile phones or desk phones that are added to your extension.

Before you begin

Your administrator has enabled the Anywhere feature on the extension.

Procedure

Step 1

Press

Settings

Step 2

Select

User preferences

Call preferences

Step 3

Select

Anywhere

Step 4

(Optional) Select a line if BroadWorks Anywhere is configured on multiple lines.

Step 5

Add contact number and name in the

Locations

screen.

Maximum length of a name that you can enter is 25. You can also keep the

Name

field empty.

Maximum length of a number that you can enter is 20.

Step 6

Enable or disable the location.

Step 7

Press

Save

to add the locations to the

Locations

list.

Cisco IP Conference Phone 8832 Multiplatform Phone User Guide

Settings

Add Multiple Locations for a BroadWorks XSI User

Summary of Contents for IP Conference Phone 8832













































































Search results

Summary of Contents for IP Conference Phone 8832

Reviews:

Related manuals for IP Conference Phone 8832

Brands by name

Popular brands

Cisco IP Conference Phone 8832, User Manual

Search results

Summary of Contents for IP Conference Phone 8832

Reviews:

Related manuals for IP Conference Phone 8832

Brands by name

Popular brands