Cisco IP Conference Phone 8832 User Manual Download Page 25

Page: 25 / 76

• Custom-Pending—The phone has downloaded a redirect URL from the EDOS server.

• Acquired—In the profile downloaded from the EDOS server, there is a redirect URL for provision

configuration. If the redirect URL download from the provisioning server is successful, this state is
displayed.

• Unavailable—Remote customization has stopped because the EDOS server responded with an empty

provisioning file and the HTTP response was

200 OK

Procedure

Step 1

Press

Settings

Step 2

Select

Status

Product information

Customization

Step 3

Press

Back

View the Network Status

Procedure

Step 1

Press

Settings

Step 2

Select

Status

Network Status

You can view the following information:

•

Network type

—Indicates the type of Local Area Netwrok (LAN) connection that the phone uses.

•

Network status

—Indicates if the phone is connected to a network.

•

IPv4 status

—IP address of the phone. You can see information on IP address, Addressing type, IP status,

Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.

•

IPv6 status

—IP address of the phone. You can see information on IP address, Addressing type, IP

status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.

•

VLAN ID

—VLAN ID of the phone.

•

MAC address

—Unique Media Access Control (MAC) address of the phone.

•

Host name

—Displays the current host name assigned to the phone.

•

Domain

—Displays the network domain name of the phone. Default: cisco.com

•

Switch port link

—Status of the switch port.

•

Switch port config

—Indicates speed and duplex of the network port.

Cisco IP Conference Phone 8832 Multiplatform Phone User Guide

Your Phone

View the Network Status

Summary of Contents for IP Conference Phone 8832













































































Search results

Summary of Contents for IP Conference Phone 8832

Reviews:

Related manuals for IP Conference Phone 8832

Brands by name

Popular brands

Cisco IP Conference Phone 8832, User Manual

Search results

Summary of Contents for IP Conference Phone 8832

Reviews:

Related manuals for IP Conference Phone 8832

Brands by name

Popular brands