2-42
Cisco Interactive Experience Client 4600 Series User Guide
Chapter 2 Setting Up the IEC
Using a VNC Viewer
Using a VNC Viewer
The IEC can be accessed by a VNC viewer. VNC is enabled or disabled in the IEM. The instructions
below explain how to create a custom action for VNC, set the remoteview.enabled property in the IEM
to ‘true’, and then launch the VNC viewer.
You will need the following:
1.
The IEC’s Maintenance Code, which can be found in the General Tab of the device (see figure
below)
2.
A VNC viewer
Figure 2-39
Maintenance Code in General Tab of Device
To use a VNC viewer to access an IEC, follow these steps:
Step 1
Log into the IEM.
Step 2
Click
Policies
in the left pane.
Step 3
In the Edit menu, click
New Policy
.
Step 4
Enter a policy name in the
Policy Name
field that indicates the purpose of this policy such as
“VNC_Start” or “VNC_Viewer”.
Step 5
Check the
Is action
check box to make this policy runtime.
Step 6
Check the
Add to custom actions
checkbox to create a custom action.
