manualshive.com logo in svg

Cisco IEC 4610, User Manual

Share
Download
Cisco IEC 4610 User Manual Download Page 105

C H A P T E R

4-1

Cisco Interactive Experience Client 4600 Series User Guide

4

Off-Line Caching

Revised: April 3, 2015

Chapter Overview

This chapter identifies how to enable aggressive caching on an IEC.

Topics in this chapter include:

  •

Off-Line Caching, page 4-1

  –

Configuring Property Settings in the IEM to Enable Aggressive Caching, page 4-1

Off-Line Caching

The user can set properties within a device profile or applied policy that enables aggressive caching on 
an IEC. As a result, content is cached by the IEC so that if the IEC becomes off-line (connection to the 
startup URL is lost), it can still display content that users previously had interacted with before going 
off-line.

Note

Content that was not interacted with before the IEC goes off-line will not be cached and thus not visible 
to users. For example, if users only move an interactive map to the east and to the north of the central 
coordinates, after the IEC goes off-line, the west and south portions of the map will not be visible to 
users. 

Only static page content is cached. Images and embedded videos are also cached. Dynamic page content 
is NOT cached. For example, news ticker content may not display at some point if the news ticker is 
being constantly updated.

In order to activate aggressive caching, you must first configure the media and web property settings in 
the IEC’s device profile or an applied policy within the IEM.Videos played on the video player are 
cached in the media cache. Web page content is cached in the web cache.

Configuring Property Settings in the IEM to Enable Aggressive Caching

Follow the steps below to configure property settings.

Summary of Contents for IEC 4610









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands