manualshive.com logo in svg

Cisco IEC 4610, User Manual

Share
Download
Cisco IEC 4610 User Manual Download Page 114

5-8

Cisco Interactive Experience Client 4600 Series User Guide

Chapter 5       Upgrading the IEC 

  IEC Firmware Upgrade Using the IEM

Figure 5-19

Specification File in Upload Image Dialog Box

Step 21

Click

 upload

.

The file will appear in the Specification list. All three files should now be uploaded. 

Step 22

In the right pane, click 

enable

. 

The version is now active. In the Active column, the word “Yes” appears.

Figure 5-20

Active Column

The images will become available for pushing to the IECs that are registered and active in the IEM.

Deactivate the previous version if one was already activated. You do not need to delete older versions.

Saving XML Files

The specification file is an XML file. If it is incorrectly saved, it will report ‘Specification is not found’ 
when uploading to the IEM. Follow the steps below to save the file correctly to avoid the error message.

Step 1

Open a recommended browser on your computer.

Step 2

Enter the specification file URL.

Summary of Contents for IEC 4610









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands