F-14
Cisco Interactive Experience Client 4600 Series User Guide
Appendix F Video Conferencing Using the Session Initiation Protocol Client
SIP Client
Figure F-3
MIC-in Port on the IEC
SIP Client
In order for the SIP to work, the Cisco IEC 4600 Series device and Cisco IP Phone will need to be
configured on the Cisco Unified Communications Manager (CUCM) and then configured on the Cisco
IEM.
To install the SIP Client, you will need the following:
•
CUCM version 9.x or 10.x
•
Cisco IEC4610 or IEC4632
•
Cisco Unified IP Phone 9951
•
Cisco TelePresence PrecisionHD USB Camera
Cisco IP Phone Set Up on the CUCM
The following steps will set up a Cisco Unified IP Phone 9951 on the CUCM. Modify the values entered
if you are setting up a different phone, Tandberg, or TelePresnce.
Step 1
Enter the IP address of your CUCM in your browser.
Step 2
Press the
Enter
button.
Step 3
In the CUCM main page, select
Cisco Unified Communications Manager
.
