F-43
Cisco Interactive Experience Client 4600 Series User Guide
Appendix F Video Conferencing Using the Session Initiation Protocol Client
Configuring Call Manager Information
Figure F-48
Directory Number in the Application Data Editor
Next you will add the username, password, domain, and transport protocol for the Cisco Unified
Communications Manager (CUCM).
Step 11
In the Application data editor, click
+
.
Step 12
Enter
sip.username
in the key field.
Step 13
In the value field, enter the username that the IEM will use to log into the CUCM. This is the unique
User ID that was entered in the CUCM.
Note
It is imperative that the value entered in the User ID field is a number. The SIP device will not
work if you enter alphabetic characters, punctuation, or spaces.
Step 14
In the Application data editor, click
+
.
Step 15
Enter
sip.password
in the key field.
Step 16
In the value field, enter the password that the IEM will use to log into the CUCM.
Step 17
In the Application data editor, click
+
.
Step 18
Enter
sip.domain
in the key field.
Step 19
In the value field, enter the IP address of the CUCM.
Step 20
In the Application data editor, click
+
.
Step 21
Enter
sip.transport
in the key field.
Step 22
Enter
udp
in the value field.
