manualshive.com logo in svg

Cisco DX650, Administration Manual

The Cisco DX650 is a cutting-edge communication device that combines video conferencing, messaging, and collaboration features into one sleek device. Get started quickly with the free Quick Start Manual, available for download from manualshive.com, providing step-by-step instructions and helpful tips to easily set up and maximize your DX650 experience.

Share
Download
background image

The following table describes the items in the Streaming Statistics areas.

Table 47: Streaming Statistics Area Items

Description

Item

IP address and UDP port of the destination of the stream.

Remote Address

IP address and UDP port of Cisco Desktop Collaboration Experience.

Local Address

Internal time stamp indicating when Cisco Unified Communications
Manager requested that Cisco Desktop Collaboration Experience start
transmitting packets.

Start Time

Indication of whether streaming is active or not.

Stream Status

Unique, fixed name that is automatically assigned to Cisco Desktop
Collaboration Experience based on its MAC address.

Host Name

Total number of RTP data packets transmitted by Cisco Desktop
Collaboration Experience since starting this connection. The value is 0
if the connection is set to Receive Only.

Sender Packets

Total number of payload octets transmitted in RTP data packets by
Cisco Desktop Collaboration Experience since starting this connection.
The value is 0 if the connection is set to Receive Only.

Sender Octets

Type of audio encoding used for the transmitted stream.

Sender Codec

Number of times the RTCP Sender Report has been sent.

Sender Reports Sent (see note)

Internal time stamp indication when the last RTCP Sender Report was
sent.

Sender Report Time Sent (see note)

Total number of RTP data packets that have been lost since starting
receiving data on this connection. Defined as the number of expected
packets less the number of packets received, where the number of
received packets includes any that are late or duplicate. The value
displays as 0 if the connection was set to Send Only.

Rcvr Lost Packets

Estimate of mean deviation of the RTP data packet inter-arrival time,
measured in milliseconds. The value displays as 0 if the connection was
set to Send Only.

Avg Jitter

Type of audio encoding used for the received stream.

Rcvr Codec

Number of times the RTCP Receiver Reports have been sent.

Rcvr Reports Sent (see note)

Internal time stamp indication when a RTCP Receiver Report was sent.

Rcvr Report Time Sent (see note)

Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)    

191

Streaming Statistics

Summary of Contents for DX650







































































































































































































































Reviews:

No comments

Related manuals for DX650

Panasonic RX-MDX55 Instruction Manual preview
RX-MDX55
Brand: Panasonic Pages: 56
ICM Controls IG-02 Operating Instruction preview
IG-02
Brand: ICM Controls Pages: 2
Yealink MVC Series Quick Start Manual preview
MVC Series
Brand: Yealink Pages: 6
Yealink MeetingSpace VC800 Deployment Manual preview
MeetingSpace VC800
Brand: Yealink Pages: 6
Yealink MeetingEye 400 Quick Start Manual preview
MeetingEye 400
Brand: Yealink Pages: 16
Yealink One Talk CP960 Quick Manual preview
One Talk CP960
Brand: Yealink Pages: 4
Yealink One Talk CP960 Quick Start Manual preview
One Talk CP960
Brand: Yealink Pages: 20
Yealink VC400 Administrator'S Manual preview
VC400
Brand: Yealink Pages: 299
Yealink VC210 Teams Edition Quick Start Manual preview
VC210 Teams Edition
Brand: Yealink Pages: 12
Yealink CP860 SERIES Quick User Manual preview
CP860 SERIES
Brand: Yealink Pages: 5
Yealink VC400 Quick Start Manual preview
VC400
Brand: Yealink Pages: 16
Yealink MeetingBar A20 User Manual preview
MeetingBar A20
Brand: Yealink Pages: 30
Yealink MeetingSpace VC200 Quick Start Manual preview
MeetingSpace VC200
Brand: Yealink Pages: 8
Yealink MVC Series: MVC800 Quick Start Manual preview
MVC Series: MVC800
Brand: Yealink Pages: 16
Yealink CP930W Telesystem Quick Reference Manual preview
CP930W Telesystem
Brand: Yealink Pages: 2
Yealink VC110 Quick Start Manual preview
VC110
Brand: Yealink Pages: 16
Magnavox MME100 - Audio Micro System User Manual preview
MME100 - Audio Micro System
Brand: Magnavox Pages: 23
Avaya Aura Communication Manager Branch i120 Installation, Quick Start preview
Aura Communication Manager Branch i120
Brand: Avaya Pages: 24

Brands by name

Popular brands

Load more brands