Description
Field
This check box determines whether you allow the EnergyWise domain controller
policy to send power level updates to the phones. The following conditions
apply:
1
One or more days must be selected in the Enable Power Save Plus field.
2
The settings in Cisco Unified Communications Manager Administration take
effect on schedule even if EnergyWise sends an override.
For example, assuming the Phone Off Time is set to 22:00 (10:00 p.m.), the
value in the Phone On Time field is 06:00 (6:00 a.m.), and the Enable Power
Save Plus has one or more days selected.
•
If EnergyWise directs the phone to turn off at 20:00 (8:00 p.m.), that
directive remains in effect (assuming no phone user intervention occurs)
until the configured Phone On Time at 6:00 a.m.
•
At 6:00 a.m., the phone turns on and resumes receiving the power level
changes from the settings in Unified Communications Manager
Administration.
•
To change the power level on the phone again, EnergyWise must reissue
a new power level change command.
To disable Power Save Plus, you must uncheck the Allow EnergyWise
Overrides check box. Leaving the Allow EnergyWise Overrides checked
with no days selected in the Enable Power Save Plus field does not
disable Power Save Plus.
Note
Allow EnergyWise
Overrides
Default Wallpaper
You can control if you or the user can set the default wallpaper for a phone, from the Cisco Unified
Communications Manager administration page for the phone.
Assign Wallpaper Control
By default, the user is able to change the wallpaper on the phone.
Procedure
Step 1
Go to
Device
>
Device Settings
>
Common Phone Profile
.
Step 2
To restrict wallpaper control to the administrator, uncheck
Enable End User Access to Phone Background
Image Settings
.
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
161
Default Wallpaper
