To change
Description
Option
1
Select
SW port speed
to
display options.
2
Select the setting that you
want.
3
Tap the selection.
Speed and duplex of the Network port. Valid
values:
•
Auto Negotiate
•
10 Half - 10-BaseT/half duplex
•
10 Full - 10-BaseT/full duplex
•
100 Half - 100-BaseT/half duplex
•
100 Full - 100-BaseT/full duplex
•
1000 Full - 1000-BaseT/full duplex
If Cisco Desktop Collaboration Experience is
connected to a switch, configure the port on the
switch to the same speed/duplex as Cisco Desktop
Collaboration Experience, or configure both to
autonegotiate.
If you change the setting of this option, you must
change the PC Port Configuration option to the
same setting.
SW port speed
1
Select
PC port speed
to
display options.
2
Select the setting that you
want.
3
Tap the selection.
To configure the setting on
multiple Cisco Desktop
Collaboration Experience devices
simultaneously, enable the Remote
Port Configuration in the
Enterprise Phone Configuration
(
System
>
Enterprise Phone
Configuration
).
If the ports are configured
for Remote Port
Configuration in Cisco
Unified Communications
Manager, you cannot
change the data on the
Cisco Desktop
Collaboration Experience
device.
Note
Speed and duplex of the Computer (access) port.
Valid values:
•
Auto Negotiate
•
10 Half - 10-BaseT/half duplex
•
10 Full - 10-BaseT/full duplex
•
100 Half - 100-BaseT/half duplex
•
100 Full - 100-BaseT/full duplex
•
1000 Full - 1000-BaseT/full duplex
If Cisco Desktop Collaboration Experience is
connected to a switch, configure the port on the
switch to the same speed/duplex as the Cisco
Desktop Collaboration Experience, table or
configure both to autonegotiate.
If you change the setting of this option, you must
change the SW Port Configuration option to the
same setting.
PC port speed
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
107
Wireless and Networks Settings Menu
