manualshive.com logo in svg

Cisco DX600 series, User Manual

The Cisco DX600 series is a cutting-edge communication solution designed for seamless collaboration. Enhance your productivity with these state-of-the-art devices. Easily access the comprehensive User Manual, available for free download at manualshive.com, to explore all the features and unleash the true potential of your Cisco DX600 series.

Share
Download
background image

DRM content will not play.

The DRM content player will
prompt you that content cannot be
played.

DRM content can be played

Mirror mode

Virtual desktop infrastructure

For users who adopt Virtual Desktop Infrastructure (VDI), Cisco DX650 supports third-party virtual desktop
clients from leading third-party vendors:

•

Citrix

•

VMware

•

Wyse

Desktop virtualization technologies may offer a degraded level of performance when remotely accessing
audio, video, and interactive multimedia resources. Unlike other desktop virtualization endpoints, your phone
features a local voice and video media plane, which enables your phone to connect to media traffic through
the device itself and outside of the remote desktop display protocol. For example, two Cisco DX600 Series
phone users in the same branch can call each other using Cisco Unified Personal Communicator running on
their remote virtual desktop and, while the control (signaling) plane resides in the data center, the audio and
video connection between the users never leaves the branch. The branch network applies packet prioritization
to the Real-time Transport Protocol (RTP) flow, and the two phones connect directly to each other without
the need for the voice to traverse the WAN twice to reach the data center. The local voice and video media
plane delivers the best quality experience for audio and video collaboration without inflating the bandwidth
consumption over the WAN.

Some applications on a remote desktop are designed for a larger screen size. To avoid cutting off part of an
application in a virtual desktop client, Cisco recommends that you set the remote desktop to a larger screen
size than 1024 x 600.

You musy run desktop virtualization clients on an external monitor in external mode, not in mirror mode.

The desktop virtualization experience on Cisco DX650 includes keyboard and mouse support. However, the
desktop virtualization clients retain the touch-mode behavior, and some keyboard and mouse actions may
differ from a typical Microsoft Windows experience. For a description of supported keyboard shortcuts and
mouse actions, refer to the USB keyboard and mouse section of this guide.

For additional information about Citrix Receiver, VMware View Client, and Wyse PocketCloud Pro, see the
product description for each application.

Related Topics

USB keyboard and mouse, on page 122

USB accessories

Each available Cisco DX650 features a USB port on the right side.

The USB port allows you to use any of the following accessories:

Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)    

   OL-28931-01

121

Accessories

Virtual desktop infrastructure

Summary of Contents for DX600 series





















































































































































Reviews:

No comments

Related manuals for DX600 series

DAB ACTIVE DRIVER M/M 1.1 Programming Manual preview
ACTIVE DRIVER M/M 1.1
Brand: DAB Pages: 10
DAB PUMPS ACTIVE DRIVER M/M 1.1 Manual preview
ACTIVE DRIVER M/M 1.1
Brand: DAB PUMPS Pages: 38
rauland Telecenter IV Description And General Information preview
Telecenter IV
Brand: rauland Pages: 2
dB Technologies DVX DM12TH User Manual preview
DVX DM12TH
Brand: dB Technologies Pages: 32
babala Hydro-Pro Instruction Manual preview
Hydro-Pro
Brand: babala Pages: 30
Vahle DCS1-HW Instructions Manual preview
DCS1-HW
Brand: Vahle Pages: 100
Vicon NOVA Powerplus VP3466 Programming Manual preview
NOVA Powerplus VP3466
Brand: Vicon Pages: 101
JVC 1209YAMMDWMTS Instructions Manual preview
1209YAMMDWMTS
Brand: JVC Pages: 41
JVC 0209RYMMDWDAT Instructions Manual preview
0209RYMMDWDAT
Brand: JVC Pages: 10
JVC 0603MWMMDWORIJVC Instructions Manual preview
0603MWMMDWORIJVC
Brand: JVC Pages: 26
JVC 0108NYMCREBET Instructions preview
0108NYMCREBET
Brand: JVC Pages: 2
JVC 0209YAMMDWCDT Instructions preview
0209YAMMDWCDT
Brand: JVC Pages: 2
JVC 0310YAMMDWDAT Instructions preview
0310YAMMDWDAT
Brand: JVC Pages: 2
JVC 0410YOMMDWCDT Instructions preview
0410YOMMDWCDT
Brand: JVC Pages: 2
JVC 4MM-4600 Service Manual preview
4MM-4600
Brand: JVC Pages: 17
JVC 0510KMMCREBET Instructions preview
0510KMMCREBET
Brand: JVC Pages: 2
JVC 20981IEN Instructions Manual preview
20981IEN
Brand: JVC Pages: 27
JVC 0207WMKMDCJEM Instructions Manual preview
0207WMKMDCJEM
Brand: JVC Pages: 48

Brands by name

Popular brands

Load more brands