Cisco DX600 series User Manual Download Page 50

Page: 50 / 148

Turn off Mobile Connect from mobile phone

Procedure

Step 1

Dial your assigned Mobile Voice Access number.

Step 2

If requested, enter your mobile phone number and PIN.

Step 3

Press

to disable Mobile Connect.

Step 4

Choose whether to turn Mobile Connect off for all configured phones or just one:

•

All phones: Enter

•

One phone: Enter

and enter the number that you want to remove as a remote destination, followed by

Turn on or off Mobile Connect access to all remote destinations from desk phone

Procedure

Step 1

Tap

Mobility

to display the current remote destination status (Enabled or Disabled).

Step 2

Tap

Select

to change the status.

Step 3

Tap

Exit

Conference calls

Your phone allows you to talk with multiple parties in a conference call.

You can create a conference in various ways, depending on your needs and the features that are available on
your phone.

•

Conference: Allows you to create a standard (ad hoc) conference by calling each participant. Conference
is available on most phones.

•

Join: Allows you to create a standard (ad hoc) conference by combining existing calls.

•

cBarge: Allows you to create a standard (ad hoc) conference by adding yourself to a call on a shared
line. Press a line button or use cBarge. Only phones that use shared lines have cBarge.

•

Meet Me: Allows you to create or join a conference by calling a conference number.

Ad hoc conference

Ad hoc conference allows you to call each participant.

Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)

OL-28931-01

Calling tasks

Conference calls

Summary of Contents for DX600 series





















































































































































Search results

Summary of Contents for DX600 series

Reviews:

Related manuals for DX600 series

Brands by name

Popular brands

Cisco DX600 series, User Manual

Search results

Summary of Contents for DX600 series

Reviews:

Related manuals for DX600 series

Brands by name

Popular brands