To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions
to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
Warning
•
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
•
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
•
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
the unit in the rack. Statement 1006
To maintain proper air circulation through the Catalyst switch chassis, you should maintain a recommended
separation of a minimum of 6 inches (15 cm) between a wall and the chassis air intake or a wall and the
chassis air exhaust. You should also allow a minimum separation of 12 inches (30.5 cm) between the hot
air exhaust on one chassis and the air intake on another chassis. Failure to maintain adequate air space
can cause the chassis to overheat and the system to fail.
Note
Unpacking the Switch
Do not discard the shipping container when you unpack the switch. Flatten the shipping cartons and store
them with the pallet. You will need these containers if you need to move or ship the switch in the future.
Note
Check the contents of the accessory kit. Verify that you received all listed equipment, which should include
the following:
•
Grounding lug and disposable ESD strap.
•
Optional equipment that you ordered, such as console cables, transceivers, or special connectors.
•
Blank covers are installed for the port card slots and power supply slots on the chassis.
•
Rack-mount shelf kit is provided that includes brackets and a tray to support the chassis when it is
installed on a rack.
Chassis Installation Kits and Cable Guides
The Catalyst 6880-X chassis ships with an accessory kit, which includes chassis installation kits and cable
guides:
•
Standard 19-inch rack-mount L brackets (factory-installed on the chassis). Associated rack-mounting
hardware is included in the accessory kit.
•
5 RU rack-mount shelf kit is included in the accessory kit.
•
Two cable management guides are included in the accessory kit.
Catalyst 6880-X Switch Hardware Installation Guide
36
OL-30827-02
Installing the Switch
Unpacking the Switch