Cisco CableCARD, Staging Manual

Page: 68 / 184

Chapter 5 Obtain and Load EMM Data
58 734375 Rev H
Copy the EMM File
After you download the EMM file, and before you load the EMMs onto the DNCS,
you must first copy the EMM file to a CD. This section provides procedures for
copying the EMM file to a CD before loading the file onto the DNCS.
Copying the EMM File to a CD
Important: Be sure you know how to use your CD recorder to copy files before
starting this procedure.
1 Insert a blank CD into the CD recorder of your PC.
2 Copy the EMM file from the directory where you saved it on your PC to the CD.
Note: If necessary, refer to the user’s guide that accompanied your CD recorder
for detailed instructions for copying files.
3 Eject the CD.
Copying the EMM File to the DNCS
1 Insert the CD into the CD-ROM drive of your DNCS and the system mounts the
CD to /cdrom/cdrom0.
2 Open an xterm window on the DNCS.
Note: We recommend that you store your EMM file in the /dvs/dncs/emmcds
directory on the DNCS. If necessary, see Create EMM Directories (on page 14)
for additional information.
3 Type cd /dvs/dncs/emmcds and press Enter .
4 Type cp /cdrom/cdrom0/* . and press Enter . The system copies the EMM TAR
file on the CD to the /dvs/dncs/emmcds directory on the DNCS.
Important: After typing /cdrom/cdrom0/ be sure to type the * followed by a
space and a period ( . ).
5 When the system has finished copying the EMM tar file, type eject cd and press
Enter to eject the CD.