Cisco CableCARD Staging Manual Download Page 164

Page: 164 / 184

Appendix D

Adding an HDD Test Server to the BFS

154

734375 Rev H

Registering the HDD Test Server with the BFS

Note:

This procedure can be used for systems that support multiple or single sites.

On the DNCS Administrative Console, select the

Application Interface Modules

tab.

Click

BFS Client

. Choose one of the following options:



For single-site systems

, the Broadcast File Server List window opens. Click

File > All Sites



For multiple-site (RCS-enabled) systems

, the Please Select a Site window

opens.

Click

File > New Server.

The Set Up Server window opens.

Enter the following data into the fields of the Set Up Server window:



Click the Server Name arrow and select

hddtest



Click the

2-way

Mode option.



From the Available Sources list, select

Out of Band



Click

Add

Result:

The Set Up Server window is configured as shown in the following

example.

Summary of Contents for CableCARD

























































































































































































Search results

Summary of Contents for CableCARD

Reviews:

Related manuals for CableCARD

Brands by name

Popular brands

Cisco CableCARD, Staging Manual

Search results

Summary of Contents for CableCARD

Reviews:

Related manuals for CableCARD

Brands by name

Popular brands