C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Terminal Services Commands on Cisco IOS XR Software
stopbits
SMR-713
Cisco ASR 14000 Series Router System Management Command Reference
OL-17231-01
stopbits
To set the stop bits used for physical terminal connections, use the
stopbits
command in line console
configuration mode. To restore the default, use the
no
form of this command.
stopbits
{
1
|
2
}
no
stopbits
Syntax Description
Defaults
Two stop bits.
Command Modes
Line console configuration
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the
stopbits
command to set the data bits attributes for physical terminal connections. Physical
terminal connections use either the console or auxiliary terminal templates.
Communication protocols provided by devices such as terminals and modems often require a specific
stop-bit setting.
Task ID
Examples
The following example shows how to change the default from two stop bits to one for the console line
template:
RP/0/RP0/CPU0:router(config)#
line console
RP/0/RP0/CPU0:router(config-line)#
stopbits 1
Related Commands
1
Specifies one stop bit.
2
Specifies two stop bits. This is the default.
Release
Modification
Release 3.7.1
This command was introduced on the Cisco ASR 14000 Series Router.
Task ID
Operations
tty-access
read, write
Command
Description
Sets the number of data bits.
