C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Terminal Services Commands on Cisco IOS XR Software
exec-timeout
SMR-692
Cisco ASR 14000 Series Router System Management Command Reference
OL-17231-01
exec-timeout
To set the interval that the EXEC command interpreter waits until user input is detected, use the
exec-timeout
command in the appropriate line configuration mode. To remove the
exec-timeout
command from the running configuration and restore the system to its default condition, use the
no
form
of this command.
exec-timeout
minutes seconds
no
exec-timeout
minutes seconds
Syntax Description
Defaults
minutes
: 10
seconds
: 0
Command Modes
Line console configuration
Line default configuration
Line template configuration
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
If no input is detected during the interval, the EXEC facility resumes the current connection. If no
connections exist, the EXEC facility returns the terminal to the idle state and disconnects the incoming
session. To disable the EXEC timeout function so that the EXEC session never timeouts, enter the
exec-timeout 0 0
command.
Task ID
Examples
The following example shows how to set the timeout interval for the console line template to 60 minutes,
0 seconds:
RP/0/RP0/CPU0:router(config)#
line console
RP/0/RP0/CPU0:router(config-line)#
exec-timeout 60 0
minutes
Minutes for the wait interval. Range is from 0 to 35791.
seconds
Seconds for the wait interval. Range is from 0 to 2147483.
Release
Modification
Release 3.7.1
This command was introduced on the Cisco ASR 14000 Series Router.
Task ID
Operations
tty-access
read, write
