manualshive.com logo in svg

Cisco 7975G - Unified IP Phone VoIP, Software Manual

The Cisco 7975G - Unified IP Phone VoIP offers cutting-edge communication features for seamless business connections. With its sleek design and intuitive interface, this device ensures crystal-clear voice calls and efficient call management. Access the comprehensive datasheet and user manual for free download on manualshive.com.

Share
Download
background image

 

7-4

Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)

OL-15790-01

Chapter 7      Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone

Status Menu

To remove current status messages, press the 

Clear

 softkey.

To exit the Status Messages screen, press the 

Exit

 softkey.

Table 7-2

Status Messages on the Cisco Unified IP Phone 7975G 

Message

Description

Possible Explanation and Action

BootP server used

The phone obtained its IP address from a BootP 
server rather than a DHCP server.

None. This message is informational only.

CFG file not found

The name-based and default configuration file 
was not found on the TFTP Server.

The configuration file for a phone is created 
when the phone is added to the 
Cisco Unified Communications Manager 
database. If the phone has not been added to the 
Cisco Unified Communications Manager 
database, the TFTP server generates a 

CFG File 

Not Found

 response.

  •

Phone is not registered with 
Cisco Unified Communications Manager.

You must manually add the phone to 
Cisco Unified Communications Manager if 
you are not allowing phones to 
auto-register. See the 

“Adding Phones with 

Cisco Unified Communications Manager 
Administration” section on page 2-11

 for 

details.

  •

If you are using DHCP, verify that the 
DHCP server is pointing to the correct 
TFTP server. 

  •

If you are using static IP addresses, check 
configuration of the TFTP server. See the 

“Network Configuration Menu” section on 
page 4-5

 for details on assigning a TFTP 

server.

CFG  TFTP  Size  Error

The configuration file is too large for file system 
on the phone.

Power cycle the phone.

Checksum Error

Downloaded software file is corrupted.

Obtain a new copy of the phone firmware and 
place it in the TFTP directory. You should only 
copy files into this directory when the TFTP 
server software is shut down, otherwise the files 
may be corrupted.

CTL Installed

A certificate trust list (CTL) file is installed in 
the phone.

None. This message is informational only.

For more information about the CTL file, refer 
to 

Cisco Unified Communications Manager 

Security Guide

.

CTL update failed

The phone could not update its certificate trust 
list (CTL) file.

Problem with the CTL file on the TFTP server.

For more information, refer to 

Cisco 

Unified Communications Manager Security 
Guide

.

Summary of Contents for 7975G - Unified IP Phone VoIP




































































































































































































































Reviews:

No comments

Related manuals for 7975G - Unified IP Phone VoIP

Samsung SPH-a660 Series Reference Manual preview
SPH-a660 Series
Brand: Samsung Pages: 2
Samsung SGH-S100 User Manual preview
SGH-S100
Brand: Samsung Pages: 73
Samsung SGH-E715 User Manual preview
SGH-E715
Brand: Samsung Pages: 164
Samsung SCH-a600 Series Quick Reference Card preview
SCH-a600 Series
Brand: Samsung Pages: 2
Raco Catalyst Addendum To Owner'S Manual preview
Catalyst
Brand: Raco Pages: 21
QMobile Q8 User Manual preview
Q8
Brand: QMobile Pages: 66
Lancom VP-100 Manual preview
VP-100
Brand: Lancom Pages: 50
Unihertz Jelly User Manual preview
Jelly
Brand: Unihertz Pages: 97
HTC One X9 dual sim Quick Manual preview
One X9 dual sim
Brand: HTC Pages: 2
NTT docomo AQUOS Zeta SH-04F Instruction Manual preview
AQUOS Zeta SH-04F
Brand: NTT docomo Pages: 26
Binatone The brick User Manual preview
The brick
Brand: Binatone Pages: 45
Activexpression TP1705EN Quick Start Manual preview
TP1705EN
Brand: Activexpression Pages: 20
Mobistel Cynus T7 User Manual preview
Cynus T7
Brand: Mobistel Pages: 24
Mobistel Mega4 User Manual preview
Mega4
Brand: Mobistel Pages: 96
Samsung SCH-U550 Manual Del Usuario preview
SCH-U550
Brand: Samsung Pages: 145
Samsung Intensity SCH-u450 User Manual preview
Intensity SCH-u450
Brand: Samsung Pages: 142
Samsung SCH-W480 User Manual preview
SCH-W480
Brand: Samsung Pages: 26
Tobii Dynavox Speech Case User Manual preview
Speech Case
Brand: Tobii Dynavox Pages: 26

Brands by name

Popular brands

Load more brands