manualshive.com logo in svg

Cisco 7975G - Unified IP Phone VoIP, Software Manual

The Cisco 7975G - Unified IP Phone VoIP offers cutting-edge communication features for seamless business connections. With its sleek design and intuitive interface, this device ensures crystal-clear voice calls and efficient call management. Access the comprehensive datasheet and user manual for free download on manualshive.com.

Share
Download
background image

 

1-22

Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)

OL-15790-01

Chapter 1      An Overview of the Cisco Unified IP Phone

Overview of Configuring and Installing Cisco Unified IP Phones

Note

Before you install a phone, even if it is new, upgrade the phone to the current firmware image. For 
information about upgrading, refer to the Readme file for your phone, which is located at:

 

 

http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser

After the phone is connected to the network, the phone startup process begins, and the phone registers 
with Cisco Unified Communications Manager. To finish installing the phone, configure the network 
settings on the phone depending on whether you enable or disable DHCP service.

If you used auto-registration, you need to update the specific configuration information for the phone 
such as associating the phone with a user, changing the button table, or directory number.

Checklist for Installing the Cisco Unified IP Phone 7975G 

Table 1-7

 provides an overview and checklist of installation tasks for the Cisco Unified IP Phone 7975G. 

The list presents a suggested order to guide you through the phone installation. Some tasks are optional, 
depending on your system and user needs. For detailed procedures and information, refer to the sources 
in the list.

Table 1-7

Checklist for Installing the Cisco Unified IP Phone 7975G 

Task

Purpose

For More Information

1.

Choose the power source for the phone:

  •

Power over Ethernet (PoE) 

  •

External power supply

Determines how the phone receives power.

See the 

“Providing Power to 

the Phone” section on 
page 2-3

.

2.

Assemble the phone, adjust phone placement, and connect the network cable.

Locates and installs the phone in the network.

See the 

“Installing the Cisco 

Unified IP Phone” section on 
page 3-5

.

See the 

“Adjusting the 

Placement of the Cisco Unified 
IP Phone” section on page 3-8

.

3.

Add a Cisco Unified IP Phone Expansion Module 7914 (optional).

Extends functionality to a Cisco Unified IP Phone by adding 14 line appearances or 
speed dial numbers.

See the 

“Attaching a Cisco 

Unified IP Phone Expansion 
Module” section on page 3-7

.

Refer to 

Cisco Unified IP 

Phone Expansion Module 
7914 Phone Guide

.

4.

Monitor the phone startup process.

Verifies that phone is configured properly.

See the 

“Verifying the Phone 

Startup Process” section on 
page 3-12

.

Summary of Contents for 7975G - Unified IP Phone VoIP




































































































































































































































Reviews:

No comments

Related manuals for 7975G - Unified IP Phone VoIP

Neoi 136 User Manual preview
136
Brand: Neoi Pages: 50
Samsung SM-T220 User Manual preview
SM-T220
Brand: Samsung Pages: 114
Samsung SGH-P408 User Manual preview
SGH-P408
Brand: Samsung Pages: 8
Samsung SCH-a610 Series Quick Reference Manual preview
SCH-a610 Series
Brand: Samsung Pages: 12
Samsung GT-S5830 Quick Start Manual preview
GT-S5830
Brand: Samsung Pages: 28
Samsung GT-I9100T Quick Start Manual preview
GT-I9100T
Brand: Samsung Pages: 28
Samsung GT-I8190 Quick Start Manual preview
GT-I8190
Brand: Samsung Pages: 35
Janam XT3 Series User Manual preview
XT3 Series
Brand: Janam Pages: 70
Yota YotaPhone User Manual preview
YotaPhone
Brand: Yota Pages: 104
LOGICOM M bot 52 Quick Start Manual preview
M bot 52
Brand: LOGICOM Pages: 13
ZTC ZT6588 User Manual preview
ZT6588
Brand: ZTC Pages: 169
mPTech Rumba 2 Manual preview
Rumba 2
Brand: mPTech Pages: 50
Konrow MUST User Manual preview
MUST
Brand: Konrow Pages: 52
Activexpression TP1705EN Quick Start Manual preview
TP1705EN
Brand: Activexpression Pages: 20
Mio Digi Walker 8870 User Manual preview
Digi Walker 8870
Brand: Mio Pages: 223
Tecno Mobili 2ADYY-H7 User Manual preview
2ADYY-H7
Brand: Tecno Mobili Pages: 16
ATCOM Rainbow1 User Manual preview
Rainbow1
Brand: ATCOM Pages: 41
ORANGE RIO II User Manual preview
RIO II
Brand: ORANGE Pages: 88

Brands by name

Popular brands

Load more brands